Major tech MT766 Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Strumenti di misura Major tech MT766. Major tech MT766 12. 600a ac/dc clamp meter with ir thermometer

Stampa la pagina

results, rub the probe tip along a length of the cord to assure placing the

tip in close proximity to the live conductor.

NOTE: The detector is designed with high sensitivity. Static electricity or

other sources of energy may randomly trip the sensor. This is

normal operation.

5.10. Mode Button

To select Diode/Continuity/CAP,VAC/Hz/%, °C/°F.

5.11. Data Hold/Flashlight Button

To freeze the LCD meter reading, press the data hold button. The data hold

button is located on the right side of the meter (top button). While data

hold is active, the HOLD display icon appears on the LCD. Press the data

hold button again to return to normal operation.

Hold down this button to turn the flashlight ON/OFF.

5.12. MIN/MAX Button

Press MIN/MAX to enter MIN, MAX Recording mode (manual range only).

Select the proper range before selecting MIN MAX to ensure that the

MIN/MAX reading will not exceed the testing range. Press once to select

MIN, press again to select MAX lastly, press again to release the MIN/MAX

recording function.

5.13. VFD Button

In ACV mode, hold down the mode key to enter the VFD measurement

mode and display VFD. In VFD mode, low-pass filter can reduce the high-

frequency noise when measuring AC voltage. VFD mode is mainly used for

AC voltage measurement of variable frequency drive and frequency

converter.

5.14. REL/

Button

Press REL key to enter the relative value measurement mode, take the

current value as the reference and obtain the relative value. Hold down this

key to turn on the laser in IR-temp measurement mode, and then press

this key to turn off the laser.

6. Battery Replacement

1. Remove the one rear head screw

2. Open the battery compartment

3. Replace the required three "AAA" 1.5V Batteries.

4. Re-assemble the meter