Decko BULLDOG 90000 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Pompa dell'acqua Decko BULLDOG 90000. Decko BULLDOG 90000 4. Bronze paddle pumps

Stampa la pagina
OPERATION (CONTINUED)
LUBRICATION
Turn the grease cups one turn before initial use and one turn for each eight hours of operation.
Periodically inspect and re-fill the grease cups. White lithium grease is a good choice as it
performs well and is water resistant.
GENERAL OPERATING TIPS
-Keep the pump as close to the water supply as possible.
-Do not let the suction line sit in sand or dirt as these materials will cause rapid wear of the pump.
-Do not pump liquids that exceed 180°F (82°C).
-Do not pump liquids that are rated as unsatisfactory on the chemical resistance chart (pg.7).
-Use an explosion proof motor when pumping flammable liquids.
-Keep hose and pipe runs as short and straight as possible.
TROUBLESHOOTING
If the pump impeller shaft will not turn
1.
Make sure the motor is rotating the same direction as the pump/impeller.
2.
If the pump is new, you may need to turn the impeller by hand to loosen.
3.
On new pumps, spray oil or other lubricant in the suction and discharge ports to loosen.
4.
Turn grease cups ½ to 1 turn to lubricate impeller shaft.
If the pump moves little or no water
1.
Check for air leaks in the suction line. Make sure all pipe joints are air tight.
2.
Check for obstructions in suction and/or discharge lines.
3.
Make sure liquid supply is within pumping rage. (Up to 20' depth)
4.
Check impeller for signs of wear. Replace if necessary.
5.
Check pump housing for wear. Replace if necessary.
If you have other questions or problems, please contact us at 1-800-495-9278 or at
www.superiorpump.com
for assistance.
4
PERFORMANCES
Gallons per minute at listed pressure and head
Pressure
0 psi
5 psi
Head in Feet
0'
11'
BP20X
15
12
BP21X
28
21
SPECIFICATIONS
Bronze Composition
Impeller Shaft
Rubber Impeller
Fasteners
Motor
Liquid Temperature Range
Solids Handling
Discharge Size
Warranty
Impeller
Bronze Parts
10 psi
15 psi
20 psi
25 psi
23'
35'
46'
58'
9
6
4
2
16
13
9
6
85-5-5-5
#416 Stainless Steel
Epichlorohydrin
Stainless Steel
90000 - GE ½ HP TEFC
90100 - Franklin ½ HP Explosion Proof
(See motor for further information)
32°-180° F (0°-82° C)
1/4"
3/4" NPT – BP20 & BP20X
1" NPT– BP21 & BP21X
90 Days
1 Year
5
30 psi
70'
-
2