Airflow iCON Manuale d'installazione e d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Ventilatore Airflow iCON. Airflow iCON 9. Domestic dc fans

The power supply unit has resettable over current and short circuit protection. An external

3Amp fuse is still required with each power supply. The power supply unit has a Led

indicator to show that the unit is switched on and functioning correctly.

Note: Switches for fans should be selected and sited in accordance with BS7161:2008

All electrical installation to be carried out by an approved electrician in accordance with Part

"P" U.K. Building Regulations and to the latest IEEE standards, or the appropriate regulations

in the country of installation.

ALWAYS ISOLATE THE POWER SUPPLY UNIT AND FAN UNIT FROM THE POWER SUPPLY

BEFORE REMOVING THE COVER.

Mechanical Installation

The power supply unit does not require dismantling and should be installed by a qualified

electrician to BS7161:2008 (IEEE wiring standards 17

Edition). The maximum length of wire

between the power supply and the fan should not exceed 5m using 1.5mm

wire.

NEVER COVER THE POWER SUPPLY UNIT WITH THERMAL INSULATION MATERIALS

iCON Domestic DC Fans can be recessed in a wall or

ceiling. A mounting skirt is provided for surface

mounting of the 30S.

To avoid the backflow of condensation into the fan in

CONDENSATION TRAP

a ceiling installation it is good practice to fit a

CONDENSATION TRAP to the outlet duct of the fan.

Ensure free running of the fan impeller and that

flexible duct connections are not over tightened to

the fan's outlet spigot.

Airflow recommend that rigid ducting is used instead

of flexible ducting, this will ensure maximum

performance

Page 3 of 8