KitchenAid KECC051HWH04 Manuale di istruzioni per l'installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Piano di cottura KitchenAid KECC051HWH04. KitchenAid KECC051HWH04 16.

5. Tighten screws just enough to hold brackets in place when

cooktop is put in cutout.

6. Turn the cooktop right side up and place in cutout.

NOTE: Make sure that the front edge of the cooktop is parallel

to the front edge of the countertop. If repositioning is needed,

lift entire cooktop up from cutout to prevent scratching the

countertop.

7. Loosen the screws and rotate the brackets so that they are

perpendicular to the edge of the burner box and extend

beyond its edge. Securely tighten screws.

Installing Brackets After Placing Cooktop in Cutout

1. Place cooktop in cutout.

NOTE: Make sure that the front edge of the cooktop is parallel

to the front edge of the countertop. If repositioning is needed,

lift entire cooktop up from cutout to prevent scratching the

countertop.

2. Remove the attachment screws for the selected bracket

locations from the bottom of the burner box.

3. Select bracket mounting holes that will allow the bracket to

extend far enough out from the cooktop for the installation of

2½" (6.4 cm) clamping screws.

A. Glass cooktop

B. Burner box

C. Attachment screw

D. Clamp bracket (extends far enough beyond

burner box to allow installation of clamping

screws)

E. 2½" (6.4 cm) clamping screw (to be installed in

"Attach Cooktop to Countertop")

F. Countertop

4. Attach brackets to burner box bottom with bracket

attachment screws using the bracket mounting holes selected

in Step 3. Securely tighten screws.