Major tech MS361 Manuale di istruzioni

Sfoglia online o scarica il pdf Manuale di istruzioni per Sensori di sicurezza Major tech MS361. Major tech MS361 2. Microwave motion sensor

Stampa la pagina

Microwave Motion Sensor

Instruction Manual

Thank you for purchasing the Major Tech MS361 Microwave Motion Sensor

The MS361 uses Microwave technology (5.8GHz) for the sensor

thus detecting even the slightest movement in its detection zone to

turn lighting on and off based on occupancy. The MS361 can be

installed into existing light fittings or in new lights. If installed and

mounted on the ceiling at a height of around 2.5m, the detection range (radius) can be adjusted

to a minimum of 3m and a maximum of 12m. The light can be set to stay on for any period of

time from approximately 10 seconds to a maximum of 12 minutes. Detection is possible to go

through doors, panes of glass or thin walls. Major Tech Microwave Sensor is ideal for home

use and also in educational and commercial properties.

MS361

SPECIFICATION:

Power Sourcing: 220 -240V/AC

Power Frequency: 50Hz

Ambient Light: <3-2000LUX (adjustable)

HF System: 5.8GHz CW radar, ISM band

Time Delay: Min. 10sec ± 3sec

Max.12min ± 1min

Rated Load: 500W

200W

FUNCTION:

➢

Can identify day and night: The sensor works in the day and at night when it is adjusted

to the "sun" position (max). The sensor works in ambient light in less than 3LUX when it is

adjusted to the "moon" position (min). As for the adjustment pattern, please refer to the

testing pattern.

➢

SENS adjustable: The sensor can be adjusted according to the location. The detection

distance of low sensitivity can be only 2m and for high sensitivity 16m which will be suitable

for a large room.

➢

Time-Delay is added continually: When it receives the second induction signals within

the first induction, it will restart timing.

➢

Time–Delay is adjustable. It can be set according to the consumer's requirements. The

minimum time is 10sec ± 3sec. The maximum is 12min ±1min.

NOTE: The high-frequency output of the HF

sensor is <0.2Mw- that is just one 5000

transmission power of a mobile phone or the

output of a microwave oven. Children safe.

INSTALLATION: (see diagram)

➢

Switch off the power.

➢

Fix the bottom on the selected position with the inflated

screw through the screw holes at the side of the sensor.

➢

Connect the power and the load to the sensor as per the

connection-wire sketch diagram.

➢

Switch on the power and test.

Detection Range: 360°/180°

Detection Distance: wall::5-15m(adjustable)

Celling:2-8m(radius),adjustable

Transmission Power: <0.2mW

Installation Height: wall:1.5-3.5m

celling:2-10m

Power Consumption: approx 0.9W

Detection Motion Speed: 0.6-1.5m/s

of the