Brita 3-Way Water Filter Dispenser System Manuale di istruzioni per l'uso - Pagina 9
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Prodotto idraulico Brita 3-Way Water Filter Dispenser System. Brita 3-Way Water Filter Dispenser System 13. 3-way water filter dispenser
Stampa la pagina
A Attach the wall mount in place using the two matching screws
and use two wall plugs, if necessary, depending on the type of
wall.
B Engage the fi lter head (2) in the wall mount (1). Please use the
fi xation holes (4).
3.7
Step 7: Commissioning
Before use, make sure that you have followed all the steps
correctly and all the parts are fi tted. Place a suitable container
under the cartridge to catch any leakages.
A Turn on the cold and hot water supplies and check the system
carefully for any leaks.
B Open the BRITA branded lever on your BRITA 3-Way Water
Filter Dispenser and rinse through until the fi ltered water runs
clear and without any bubbles (at least 2 litres).
4
Replacing the fi lter cartridge
The fi lter cartridge must be replaced when it runs out or at
latest 6 months after commissioning, irrespective of the level of
exhaustion of the fi lter system.
Read the Operating and Safety Information (chapter 9)
prior to exchange. After storage and transport below 0°C,
!
the product must be stored in the open original packaging
for at least 24 hours at the stated ambient temperatures
( chapter 7) for operation.
The fi lter cartridge can be pivoted by 90° in the wall mount
for easy removal. When the locking handle is open, the
water supply to the cartridge is interrupted and by-passing
with direct water fl ow from the water inlet to the outlet is
possible.
Replacing the P 1000 (see fi g. 8):
A Open the locking handle (3).
B Place a suitable container under the fl ush hose to catch the rinse
water. Activate the fl ush valve (5) and release pressure from the
system.
8
ENGLISH
C Remove the exhausted fi lter cartridge (4) from the fi lter head (2) –
please be aware, the cartridge is fi rmly embedded so you can
give it a fi rm pull without worrying about breaking it.
D Insert the new fi lter cartridge (see chapter 3.5).
E Close the locking handle (3).
F Reset the BRITA cartridge exchange indicator (chapter 5)
Replacing the P 3000 refi ll cartridge is exactly the same as
replacing the P 1000. The P 3000 lasts up to 6 months with the
++-setting and up to a year with the +-setting. Please take this
into consideration while resetting your BRITA cartridge exchange
indicator.
5
Resetting the BRITA electronic cartridge
exchange indicator
If the maximum time or volume is reached, the BRITA electronic
cartridge exchange indicator will start beeping. (chapter 5)
– then the fi lter cartridge should be changed (chapter 4)
– the BRITA electronic cartridge exchange indicator has to be
reset.
a) Press the DISPLAY button briefl y to activate the display.
b) Press and hold the START/RESET button for 5 seconds until a
long beep sounds.
c) The last programmed 90 or 180 day setting now appears in
the display.
d) The timer starts automatically.
6
Maintenance
Regularly check the fi lter system for leaks. Regularly check the
hoses for kinks. Bent hoses must be replaced.
Prior to exchanging the fi lter system, read the Technical
!
Data (chapter 7) and the Operating and Safety Information
(chapter 9).
Regularly clean the outside of the fi lter system with a soft, damp
cloth.
Do not use any abrasive chemicals, cleaning solutions or
!
astringent cleaning agents.