Green Creative ATOM Track Manuale di installazione - Pagina 3
Sfoglia online o scarica il pdf Manuale di installazione per Apparecchiature di illuminazione Green Creative ATOM Track. Green Creative ATOM Track 5.
Stampa la pagina
1.
Make sure the lamp adapter is a L type and compatible with the L track system. (fig. 1)
Note: the L type adapter is compatoble with single or two-circuit track types. Simply lift the contact to its up position for two-circuit application.
2.
Insert the head of adapter into the slot of the track rail making sure the locking tab is parallel to the track's polarity line. (fig. 2)
3.
While holding the adapter up to the track, push the fixture upward, then twist the body of the fixture 90 degrees until the locking tab on the adapter snaps into the track groove.
(fig. 3)
Note: the ground pin needs to be touching the grounding pin. (fig. 4)
The adapter only rotates in one direction, therefore do not forcefully rotate the adapter in the wrong direction as it may damage it.
Removing the lamp
1.
While holding the fixture in place, gently twist the fixture 90 degrees until it can easily be removed from the track groove.
1.
Make sure the POWER IS TURNED OFF at the source to the J-box in which you are installing the product.
2.
Attach the mounting bracket to the J-box using two of the provided screws. (fig. 1)
3.
Attach the safety clip to one of the holes in the mounting bracket. (fig. 2)
4.
Wire the wires from the back of the fixture to power source inside the J-box (black to hot, white to neutral, green to ground). Carefully tuck all the wires and connectors inside
the J-box. (fig. 3)
5.
Attach the canopy to the mounting bracket using the canopy screws (provided), screw in until the fixture is secured. (fig. 4)
6.
Restore power at the source and installation is complete.
www.greencreative.com - [email protected] - Tel / Fax: (866) 774-5433 -
TRACK INSTALLATION GUIDE --- JBOX CANOPY MOUNT
For use with ATOM track series.
L
/ GREENCREATIVELED
/ GClightingLED
/ GREEN-CREATIVE
An ILLUMUS Brand