CenturionPro THE MINI Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Trimmer CenturionPro THE MINI. CenturionPro THE MINI 18.

Stampa la pagina

FREQUENTLY ASKED QUESTIONS

HOW EASY IS IT TO CLEAN?

Our machines can be taken apart and cleaned within 10-15 minutes. There are four screws to remove

the top cover, pressure wash the machine and then you're good to go. Our Quantanium coating is

similar to a Teflon pan you would have at home which is even easier to clean. Just submerge in warm

water, let soak and then wipe with a soft cloth. We recommend to clean every 3-4 hours of use, but it

depends on your strain. We know the importance of down time during a harvest so we wanted to make

this process extremely quick and easy

WHAT IS THE MAINTENANCE LIKE?

We have several video tutorials on our website with how to fully service your machine. These step by

step DIY videos make it very easy to do everything necessary to maintain your machine. All parts can be

ordered through any hydroponic store nationwide.

DO YOUR MACHINES TRIM WET OR DRY?

All CenturionPro trimming machines now come all inclusive with both wet and dry tumblers. You have

a wet tumbler for wet trimming and a dry tumbler for dry trimming. This is a major benefit because you

can purchase one machine and still have the capability to trim wet or dry flowers. Our dry tumblers

have a smaller cutting surface than the wet. If you were to run dry product through a wet tumbler, you

would have excess loss of flowers. Keeping the yield high is the biggest advantage to having a specific

tumbler for both methods of harvesting, wet or dry. Do you only trim one way? Get all your tumblers

as either wet or dry!

ADDITIONAL ASSISTANCE

You are about to enjoy the experience of CenturionPro Solution's automated trimming machine. For critical information on assembly, cleaning, care, maintenance and

how to operate your machine correctly, please review this manual and check out our video tutorials, which are posted on our website for your ease and convenience.

Go to

www.cprosolutions.com/video-tutorials

These tutorials provide how-to assistance on the following aspects of machine maintenance:

• Straightening the Tumbler/Drum

• Skirt Assembly

• Removing and Replacing The Belt

• Replacing The Motor

• Blade Removal and Cleaning

**If for some reason you can't find an answer to your question online or in your manual, please do not hesitate to contact us.

WE ARE OPEN MONDAY THROUGH FRIDAY FROM 9AM TO 5PM PST - PH: 1-855-535-0558

FILLING OUT THE "CONTACT US" FORM ON THE WEBSITE, IS ANOTHER SURE WAY TO GET IN TOUCH.

1 855 535 0558

ARE YOUR MACHINES BUILT TO AN INDUSTRIAL STANDARD?

We do not compromise quality for cost savings. All CenturionPro Solutions machines are composed

of the highest quality materials available in North America and each machine is put through a

comprehensive quality control inspection. We only use brand name components in the build out of our

machines which enables us to have the comfort in giving you a 10 year trimmer warranty. With proper

maintenance these machines will last you well over a decade.

WHAT IS THE OPTIMAL ROOM TEMPERATURE TO TRIM?

Use your CenturtionPro machine in 50-60 °F (10- 15 °C) room to get the best performance. Cooler

temperatures prevent excessive sticking to machine components.

MY MACHINE IS NOT WORKING LIKE IT DID WHEN IT WAS NEW, WHY?

Make sure to fully clean the machine and blades. If the machine is clean, the blade is adjusted properly

and the leaf collector has full suction, then your machine should trim exactly like it was new.

WHY IS MY PRODUCT STICKING TO THE INSIDE OF THE TUMBLER?

If you find that product is sticking to the inside of the tumbler, first clean the tumbler. When you

reassemble it, make sure the top brush bristles are poking through 1/4" into the tumbler.

HOW MUCH PRODUCT SHOULD BE IN THE TUMBLER AT ONE TIME?

The tumbler should be 40-60% full when trimming.

for our video tutorials.

• Complete Unit Assembly

• Replacing the Bearings

• Manually Bucking Your Product

• Trimmer Cleaning and Maintenance

• Replacing The Tumbler/Drum Ring

cprosolutions.com

• Sharpening The Blade

• Cleaning The Blower

• Adjusting The Blade

• Packing The Bearings

• Replacing The Pulleys