CenturionPro GC MINI Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature industriali CenturionPro GC MINI. CenturionPro GC MINI 12. Bucker

Stampa la pagina

CLEANING & MAINTENANCE

STEP 1:

REMOVE

BEARING BAR

4 - 3/16" hex top x 0.75" bolts

STEP 4:

BLADE

CLEANING

Clean the BLADE of

debris by soaking

in warm water

and wiping down

with 70% isopropyl

alcohol.

IMPORTANT NOTE:

IT IS IMPERATIVE THAT YOU CLEAN THE MACHINE AFTER EVERY 30 MINUTES OF USE ON WET PRODUCT AND AFTER

EVERY HOUR OF USE ON DRY PRODUCT. LOOSE DEBRIS CREATES RESISTANCE ON THE BLADE, WHICH CAN CAUSE THE

MOTOR TO OVERHEAT AND POTENTIALLY BURN OUT. USER NEGLIGENCE IS NOT COVERED BY WARRANTY.

For more information or to watch our video tutorials visit cprosolutions.com

* Ensure machine is unplugged before cleaning.

Avoid getting bearings and motor wet.

STEP 2:

REMOVE TOP

PLATE

10 - 3/16" hex top x

0.5" bolts

STEP 5:

CLEAN

BAG

Remove bag from system

and empty contents. Turn

bag inside-out and pressure

wash. Allow bag to dry.

* Periodically check that

the collection bag is

not kinked and that

the waste material is

fully making its way

down into the bag.

FOR OPTIMAL PERFORMANCE AND LIFE,

THE BUCKER BLADE MUST BE REMOVED

AND CLEANED AFTER DAILY USE.

OWNERS MANUAL

GENTLE CUT - GCM BUCKER

STEP 3:

BLADE

REMOVAL

2 - 1/8" x 0.5" bolts

STEP 6:

REASSEMBLE

BUCKER

Re-assemble bucker

in reverse order.