JAM Pedals Harmonious Monk mk.2 Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Pedale musicale JAM Pedals Harmonious Monk mk.2. JAM Pedals Harmonious Monk mk.2 2.
Stampa la paginaSPEED MULTIPLYING FEATURE:
Only available while in the Legacy mode.
An instantaneous press of the TAP
footswitch will engage and disengage
the speed multiplying function.
There are 2 available factors: x2 and
x1.5 (dotted feel). In order to change
the multiplication factor, keep the TAP
footswitch pressed until you see 2 TAP
LED blinks for the x2 factor or 3 TAP LED
blinks for the x1.5 factor.
CHOP FEATURE:
While in the Amplitude mode and
with the Square LFO selected, you can
activate the CHOP effect (kill-dry) which
effectively alternates between sound
and complete silence. While in the
aforementioned settings, simply turn the
Depth potentiometer all the way up (to
the right) for the CHOP effect to kick in.
KNOBS:
● D = Depth of tremolo effect
● S = Speed (rate) of tremolo
modulation
● L = Master volume Level
● M = Mix between dry and
effected signal
TOGGLE-SWITCHES:
● Top 2-way toggle switch: Top position
for Harmonic, bottom position for
Amplitude tremolo modes
● Lower 3-way toggle switch: Top
position for Square, middle position
for Sine, bottom position for Reverse
Sawtooth LFO shapes
FOOTSWITCHES:
● LEFT: Turns the pedal ON / OFF
● RIGHT: TAP TEMPO / SPEED X
JACKS:
● IN: Input
● OUT: Output
● 9V: 9V DC power
(see specifications)
INTERNAL TRIMMERS:
● TOP ROW of 3: LEFT: Treble EQ |
MIDDLE: Midrange EQ | RIGHT: Bass
EQ controls only for wet (effected)
sound
● LOWEST TRIMMER: Adjusts the input
gain of the pedal's wet path - this will
affect the wet signal's output level
SPECIFICATIONS
● True Bypass
● Works with 9V DC adaptor (centre-
negative, isolated power supply
recommended)
● Power consumption (max): 145 mA
● Dimensions (jacks, pots etc. included):
7.5 x 12 x 5.6cm / 2.9 x 4.7 x 2.2 inches
● Weight: 300g / 0.66lbs
● Output and input are in-phase
HARMONIC
AMPLITUDE
DEPTH
REVERSE
LEVEL
SAWTOOTH
ON
INPUT GAIN
SPECIFYING STARTUP STATE:
By default your Harmonious Monk will be on the
Off-state as it receives power. If you want it to be on
the On-state on receiving power, please remove the
power cable, keep the ON / OFF footswitch pressed
and reinsert the power cable. This will change the
startup state. To confirm successful change, remove
and reinsert power cable. To revert to the previous
state, repeat the steps above.
SPEED
SQUARE
SINE
MIX
TAP