Gandy 24H13 Manuale delle parti e del montaggio - Pagina 5
Sfoglia online o scarica il pdf Manuale delle parti e del montaggio per Spreader Gandy 24H13. Gandy 24H13 19. 24-inch variable rate spreader
Anche per Gandy 24H13: Manuale dell'operatore (8 pagine), Manuale dell'operatore (8 pagine), Manuale dell'operatore (10 pagine)
Stampa la pagina
Step# 2
(Spread Plate Assembly)
1. Locate Spread Plate (2824868).
2. Slide rolled edge (side without bend) of spread plate onto bearing retainer rod as shown in Diagram #7.
3. Re-install the last bearing retainer to hopper and spread plate re-using the 5/16" washer and wing nut.
3. Adjust bearing retainers so spread plate can pivot freely. Tighten booth 5/16" wing nuts securely.
Diagram #7
Step# 3
(Tire Assembly)
Install tire (R02-0013-000) to rotor bar shaft end using the 3/16 x 1-3/4 clevis pin (C22-0187-090) and
3/32 x 3/4 cotter pin (C20-0093-020). Pin tire to the hole in the rotor bar that is closest to hopper.
Repeat for other tire.
Diagram #8
Page 5 of 19
2824-A1
2836-A1