IKEA DATID HGA4K Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Piano cottura IKEA DATID HGA4K. IKEA DATID HGA4K 16. Lagan
Anche per IKEA DATID HGA4K: Istruzioni (4 pagine), Manuale (24 pagine), Manuale di istruzioni per il montaggio (20 pagine), Manuale (12 pagine)

Stampa la pagina

ENGLISH

Gas setting conversion

This model is designed for use with natu-

ral gas but can be converted for use with

butane or propane gas providing the correct

injectors. The injectors not supplied with the

appliance have to be ordered from After Sales

Service (refer to the Service chapter).

For data concerning injector replacement, see

chapter "Technical data"

Warning! Conversion or replacement

can only be performed by a registered

installer.

To replace injectors:

1. Remove pan support.

2. Remove burner cap and crown.

3. With a socket spanner 7 unscrew and re-

move the injectors, replace them with the

ones required for the type of gas in use.

4. Reassemble the parts, following the same

procedure backwards.

Important! Replace the rating label (placed

near gas supply pipe) with relevant one for the

new type of gas supply before sealing the

appliance. If the appliance is already sealed

please stick it directly on the user manual

booklet after Technical data chapter close to

the rating plate drawing.

You can find this label in package sup-

plied with appliance

If the feeding gas pressure will be differ-

ent or variable, comparing with the re-

quired, you must install an appropriate pres-

sure adjuster, which is not supplied with the

product and if needed must be ordered sep-

arately from the local After Sales Service (refer

to the Service chapter). The pressure adjuster

must be fitted on gas supply pipe, in compli-

ance with the rules of the force.

Environment concerns

The symbol

on the product or on its

packaging indicates that this product may not

be treated as household waste. Instead it

The rating plate is located on the lower casing

of the hob.

Adjusting flame level

When hob has been fully installed, it is neces-

sary to check the minimum flame setting:

1. Turn the gas tap to the maximum position

and ignite.

2. Set the gas tap to the minimum flame po-

sition then turn the control knob from mini-

mum to maximum several times. If the flame

is unstable or extinguished, follow the pro-

cedure further.

3. Re-ignite the burner and set to minimum.

4. Remove the control knob.

5. To adjust, use a thin bladed screwdriver

and turn the adjustment screw until the

flame is steady and does not extinguish,

when the knob is turned from minimum to

maximum, and vice versa (see following

picture).

6. Repeat this procedure for all burners.

7. Reassemble the knobs.

Warning! If the appliance is connected

to liquid gas (G31 propane or G30

butane), the regulation screw must be fastened

as tightly as possible.

IKEA of Sweden AB

SE-34381 Älmhult

should be taken to the appropriate collection

point for the recycling of electrical and

electronic equipment. By ensuring this product

is disposed of correctly, you will help prevent