IKEA GORLIG Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Piano cottura IKEA GORLIG. IKEA GORLIG 24. Built-in oven
Anche per IKEA GORLIG: Manuale d'uso (24 pagine), Manuale d'uso (24 pagine), Manuale d'uso (20 pagine), Manuale d'uso (32 pagine), Manuale (24 pagine), Istruzioni (16 pagine), Manuale di istruzioni per l'installazione (28 pagine), Manuale (40 pagine), Manuale (28 pagine), Manuale (48 pagine), Manuale (24 pagine)

Stampa la pagina

ENGLISH

and a cleaning agent. Do not clean the

accessories in the dishwasher.

Clean stubborn dirt with a special oven

cleaner.

If you have nonstick accessories, do not

clean them using aggressive agents, sharp-

edged objects or a dishwasher. It can cause

damage to the nonstick coating.

Moisture can condense in the oven or on the

door glass panels. To decrease the

condensation, operate the oven for 10

minutes before cooking. Clean the moisture

from the cavity after each use.

Stainless steel or aluminium ovens

Clean the oven door with a damp cloth or

sponge only. Dry it with a soft cloth.

Do not use steel wool, acids or abrasive

materials as they can damage the oven

surface. Clean the oven control panel with

the same precautions.

Cleaning the door gasket

Regularly do a check of the door gasket. The

door gasket is around the frame of the oven

cavity. Do not use the oven if the door gasket

is damaged. Contact an Authorised Service

Centre.

To clean the door gasket, refer to the

general information about cleaning.

Cleaning the oven door

The oven door has two glass panels. You can

remove the oven door and the internal glass

panel to clean it.

The oven door can close if you try

to remove the internal glass panel

before you remove the oven door.

Caution! Do not use the

appliance without the internal

glass panel.

Open the door fully

and hold the two

door hinges.

Close the oven door

halfway to the first

opening position.

Then pull forward

and remove the

door from its seat.

90°

Release the locking

system to remove

the internal glass

panel. Turn the two

fasteners by 90°.

Lift and turn the

levers on the two

hinges with a

screwdriver.

Put the door on a

soft cloth on a stable

surface.

Remove the

fasteners from their

seats.