Century UK Neon Blaze CP V2.4G Manuale d'uso - Pagina 6
Sfoglia online o scarica il pdf Manuale d'uso per Giocattolo Century UK Neon Blaze CP V2.4G. Century UK Neon Blaze CP V2.4G 18.
Stampa la pagina6-CH Transmitter Features:
1. The DIP switches are available for various servos. It can perform the flight actions such as
ascending, descending, forward, backward, leftward, rightward and so on.
2. 4-channel micro-computer as the encoder; output power: ≤ 10mW; current drain: 50mA;
power source: 1.2V X 8 Ni-Cd battery ( 9.6V 600mAh) or 1.5V X 8 AA dry cell battery.
3. Free to switch between left-hand and right-hand throttles.
Control Identification and function:
MODE II
1. Left stick / Throttle. It controls your helicopter ascending, descending, left, and right. Push up
to ascend your helicopter, pull down to descend, push leftward to fly left, and push rightward
to fly right.
2. Right stick / Rudder. It controls your helicopter forward, backward, left moving and right moving.
Push up to fly your helicopter forward, pull down to fly backward, push leftward to move your
helicopter left, and push rightward to move right.
MODE l
1. Left stick / Rudder. It controls your helicopter forward, backward, left, and right. Push up
to fly your helicopter forward, pull down to fly backward, push leftward to fly left, and push
rightward to fly right.
2. Right stick / Throttle. It controls your helicopter ascending, descending, left moving
and right moving. Push up to ascend your helicopter; pull down to descend, push leftward
to move your helicopter left, and push rightward to move right.
3. Power indicator. The indicator is consisted of three colors: red, yellow, and green. Green
LED on means the electricity is enough to fly; Green LED off and yellow LED on indicate
the power is not enough and stop flying; Yellow LED off and red LED on show the power
is in extreme shortage, and please stop flying at once.
4. Elevator trim. It controls and modifies your helicopter forward and backward. Push up to
fly forward, and pull down to fly backward.
5. Rudder trim. The trim controls and modifies your helicopter leftward and rightward. Move
the trim left to fly leftward, and move right to fly rightward.
6. Throttle trim. The throttle trim controls your helicopter to ascend and descend. Push up
the trim to ascend, and pull down to descend.
7. Aileron trim. The aileron trim controls your helicopter leftward and rightward. Push the trim
left and fly left, and push the trim rightward and fly right.
8. Power switch. Turn on or off the power of the transmitter. Push up the witch to turn on
the power, and push down to turn off.
9. Antenna. Transmit the signals.
10. Charge jack. Charge the rechargeable battery pack at current 50mA, voltage ≤12V.
(Notice: the charge jack is forbidden to use for non-rechargeable battery pack).
11. Battery box. Please note the polarities while inserting the batteries.
12. Battery box cover. protect the transmitter battery. please open the box according to
the arrow direction when replace the battery.
13. Gear switch. Convert the gear switch to fold or release the skid landing system.
Switching the switch up is ON, and switching the switch down is OFF.
14. Flight mode switch: There are normal flight mode and 3D inversed mode. Put it on "N"
position is normal mode,and put it on "1" position is 3D inversed mode.
15. PIT limit / Exponential / Rudder mixing adjustment knob (V2
DIP switches, all the functions can be switchable.
16. Throttle curve / PIT curve / Gyro sensitivity adjustment (V1). IUnder the help of DIP
switches, the knob can experience throttle curve adjustment, PIT curve adjustment and
gyro sensitivity adjustment .
Note: The model is supplied mode 2 but can be converted to mode 1.
Fig. 1-1
Fig. 2
The Factory Default Settings:
. Under the help of
)
5
( MODE lI )
PIT limit / Exponential
/ Rudder mixing (V2)
Power indicator
Flight mode switch
Throttle curve /
PIT knob / Gyro
sens knob(V1)
Right stick / Rudder
Elevator trim
Aileron trim
Power switch
Throttle trim
Rudder trim
Left stick /Throttle
(MODE l)
PIT limit / Exponential
/ Rudder mixing (V2)
Power indicator
Flight mode switch
Throttle curve /
PIT knob / Gyro
sens knob(V1)
Throttle trim
Right stick / Throttle
Aileron trim
Power switch
Elevator trim
Rudder trim
Left stick / Rudder
Carrying handle
Ornament
cover
Charge jack
Cover of the
battery box
DIP Switch
CCPM / ELEV
RUDD MIX REV
CCPM / NOR
RUDD MIX /
GYRO SENS
CHANNEL
ON/OFF
CHANNEL
OFF
1
7
2
8
OFF
3
9
OFF
4
10
ON
OFF
5
11
6
12
ON
Gear
Gear
Antenna
ElEV
AILE
THRO
RUDD
GEAR
PIT
EXP
PLT / PIT
ON/OFF
OFF
ON
ON
OFF
OFF
OFF