HIKVISION DS-K1T341BMWI-T Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Telecamera di sicurezza HIKVISION DS-K1T341BMWI-T. HIKVISION DS-K1T341BMWI-T 2. Face recognion terminal
Anche per HIKVISION DS-K1T341BMWI-T: Manuale di avvio rapido (2 pagine)
Stampa la pagina
3.2
Wiring (With Secure Door Control Unit)
Face Recogni on Terminal
Secure Door Control Unit
Power Input
SENSOR
Sensor Input
Yellow
Secure Door
B1
Control Unit
Blue
RS-485
B2
Wiring Terminal
BUTTON
Red/
B3
Exit Bu on
Black
NC
COM
Lock Output
4
Quick Opera on
Ac va on
We highly recommend you to create a strong password of your
Power on and wire the network cable after installation.
own choosing (using a minimum of 8 characters, including at least
you should activate the device before the first login.
three kinds of following categories: upper case le ers, lower case
If the device is not activated yet, it will enter the Activate
le ers, numbers, and special characters) in order to increase the
Device page after powering on.
security of your product. And we recommend you change your
password regularly, especially in the high security system, changing
Steps:
the password monthly or weekly can be er protect your product.
1. Create a password and confirm the password.
2. Tap Ac vate to ac vate the device.
For other ac va on methods, see the device user manual.
6
Add Face Picture
1. Use finger to hold the screen surface for 3 s and slide to right/le and enter
the ac va on password to enter the Home page.
2. Enter the User Management page, tap + to enter the Add User page.
3. Set the user parameters according to actual needs.
4. Tap Face and add the face informa on according to the instruc ons.
You can view the captured picture on the screen, Make sure the face picture is
in good quality and size.
For details about the ps and posi ons when collec ng or comparing the face
picture, see the contents on the right.
5. If the picture is in good condi on, tap
.
Or tap
to take another face picture.
6. Tap √ to save the se ngs.
Go back to the ini al page to start authen ca on.
For other authen ca on methods, see the device user manual.
User other authen ca on methods if the device is affected by the light or
other items.
1:N Matching: The device will compare the captured face picture with the
ones in the database.
1:1 Matching: The device will compare the captured face picture with the
user linked face picture.
Biometric recogni on products are not completely applicable to an -spoofing
environments. If you require a higher security level, use mul ple authen ca on
modes.
Red
Black
Door Contact
Green/Brown
NO
Black
COM
NC
The secure door control unit should connect to
Exit Button
an external power supply separately. The
Green/Black
NO
suggested external power supply is 12 V, 0.5 A.
COM
NC
For scenarios with high safety requirement, use
the secure door control unit wiring first.
White/Purple
(NC)
You can ask the technical support to purchase for
White/Black
(COM)
Electric
the secure door control unit separately.
Dropbolt
White/Red
The picture here are parts of the wiring. For details,
Power
see the secure door control unit's user manual.
Electric
Strike
(NO)
Steps A erwards
A er ac va ng, you can select language, set
password change type, set reserved ques ons,
set applica on mode, set network parameters,
access to Hik-Connect, set privacy, and set
administrator.
Tips When Collec ng/Comparing Face Picture
Expression
Keep your expression naturally when collec ng or comparing face
pictures, just like the expression in the picture on the right.
Do not wear hat, sunglasses, or other accessories that can affect the facial
recogni on func on.
Do not make your hair cover your eyes, ears, etc. and heavy makeup is not
allowed.
Posture
In order to get a good quality and accurate face picture, posi on your face looking at the camera
when collec ng or comparing face picture.
Correct
Tilt
Side
Raise
Bow
Size
Make sure your face is in the middle of the collec ng window.
Correct
Too Close
Too Far
5
Temperature Measurement
1. Hold the screen surface and verify the iden ty to enter the Home page.
2. Tap Temp to enter the Temperature Se ngs page. Configure the parameters.
Enable Temperature Detec on:
When the func on is enabled, the device will authen cate the permissions and at the same
me take the temperature.
When the func on is disabled, the device will authen cate the permissions only.
Over-Temperature Threshold:
Edit the threshold according to actual situa on. If the detected temperature is higher than
the configured one, an alarm will be triggered. By default, the value is 37.3°
Temperature Compensa on:
If the measured temperature is higher/lower than the actual object's temperature, you can
set the compensa on temperature here. Available range: -99 °C to 99 °C.
Door Not Open If Temp. is Abnormal:
When Enabling the func on, the door will not open when the detected temperature is
higher than the configured temperature threshold. By default, the func on is enabled.
Temperature Measurement Only:
When enabling the func on, the device will not authen cate the permissions, but only take
the temperature. When the func on is disabled, the device will authen cate the
permissions and at the same me take the temperature.
Unit: Select a temperature unit according to your preference.
Measurement Area Calibra on/Measurement Area Se ngs:
Configure the temperature measurement area and the correc on parameters.
Posi ons When Collec ng/Comparing Face Picture
Too High
Recommended Height:
1.43 m to 1.90 m
Too Low
1.4 m
1.4 m
0.5 m
0.5 m
Too Close
Too Far
1.4 m
1.4 m
0.5 m
0.5 m
Regulatory Informa on
FCC Informa on
Please take a en on that changes or modifica on not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a residen al installa on. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may
cause harmful interference to radio communica ons. However, there is no guarantee that interference will not occur in a par cular
installa on. If this equipment does cause harmful interference to radio or television recep on, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separa on between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
FCC Condi ons
This device complies with part 15 of the FCC Rules. Opera on is subject to the following two condi ons:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired opera on.
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the RE Direc ve 2014/53/EU, the EMC Direc ve 2014/30/EU, the
RoHS Direc ve 2011/65/EU.
2006/66/EC (ba ery direc ve): This product contains a ba ery that cannot be disposed of as unsorted municipal waste in
the European Union. See the product documenta on for specific ba ery informa on. The ba ery is marked with this
symbol, which may include le ering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the
ba ery to your supplier or to a designated collec on point. For more informa on see: www.recyclethis.info
2012/19/EU (WEEE direc ve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collec on points. For more informa on see: www.recyclethis.info
Warning
In the use of the product, you must be in strict compliance with the electrical safety regula ons
of the na on and region.
Provide a surge suppressor at the inlet opening of the equipment under special condi ons such as the mountain top, iron tower, and
forest.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
An all-pole mains switch shall be incorporated in the electrical installa on of the building.
1. This equipment is not suitable for use in loca ons where children are likely to be present.
2. CAUTION: Risk of explosion if the ba ery is replaced by an incorrect type.
3. Improper replacement of the ba ery with an incorrect type may defeat a safeguard (for example, in the case of some lithium
ba ery types).
4. Do not dispose of the ba ery into fire or a hot oven, or mechanically crush or cut the ba ery, which may result in an explosion.
5. Do not leave the ba ery in an extremely high temperature surrounding environment, which may result in an explosion or the
leakage of flammable liquid or gas.
6. Do not subject the ba ery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or
gas.
7. Dispose of used ba eries according to the instruc ons.
CAUTION: This bracket is intended for use only with DS-K1T341BMI-T/DS-K1T341BMWI-T face recogni on terminal. Use with other
equipment may result in instability causing injury.
CAUTION: This equipment is for use only with Hikvision's bracket. Use with other (carts, stands, or carriers) may result in instability
causing injury.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.
Please make sure that the power has been disconnected before you wire, install or dismantle the device.
When the product is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the
service center.
If the product does not work properly, please contact your dealer or the nearest service center. Never a empt to disassemble the
device yourself. (We shall not assume any responsibility for problems caused by unauthorized
repair or maintenance.)
Cau on
The equipment has been designed, when required, modified for connec on to an IT power distribu on system.
+ iden fies the posi ve terminal(s) of equipment which is used with, or generates direct current. + iden fies the nega ve terminal(s)
of equipment which is used with, or generates direct current.
No naked flame sources, such as lighted candles, should be placed on the equipment.
The serial port of the equipment is used for debugging only.
Burned fingers when handling
the fingerprint sensor metal
. Wait one-half hour a er switching off before handling the parts.
Install the equipment according to the instruc ons in this manual.
To prevent injury, this equipment must be securely a ached to the floor/wall in accordance with the installa on instruc ons.
Do not drop the device or subject it to physical shock, and do not expose it to high electromagne sm radia on. Avoid the equipment
installa on on vibra ons surface or places subject to shock (ignorance can cause equipment damage).
Do not place the device in extremely hot (refer to the specifica on of the device for the detailed opera ng temperature), cold, dusty
or damp loca ons, and do not expose it to high electromagne c radia on.
The device cover for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ven la on or heat source such as heater or radiator is forbidden (ignorance can
cause fire danger).
Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunc on
however), and affec ng the endurance of sensor at the same me.
Please use the provided glove when open up the device cover, avoid direct contact with the device cover, because the acidic sweat of
the fingers may erode the surface coa ng of the device cover.
Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do not use alkaline detergents.
Please keep all wrappers a er unpack them for future use. In case of any failure occurred, you need to return the device to the
factory with the original wrapper.
Transporta on without the original wrapper may result in damage on the device and lead to addi onal costs.
Improper use or replacement of the ba ery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used ba eries according to the instruc ons provided by the ba ery manufacturer.
Biometric recogni on products are not completely applicable to an -spoofing environments. If you require a higher security level,
use mul ple authen ca on modes.
Please make sure that the biometric recogni on accuracy will be affected by the collected pictures' quality and the light in the
environment, which cannot be completely correct.
4