IKEA MATMASSIG Manuale - Pagina 9

Sfoglia online o scarica il pdf Manuale per Piano cottura IKEA MATMASSIG. IKEA MATMASSIG 48.
Anche per IKEA MATMASSIG: Manuale (28 pagine), Manuale (24 pagine), Manuale (44 pagine), Manuale (44 pagine), Manuale (28 pagine), Manuale (48 pagine), Manuale (36 pagine), Manuale (28 pagine), Manuale (44 pagine), Manuale (29 pagine), Manuale (12 pagine)

Stampa la pagina

ENGLISH

Installation process must follow

the laws, ordinances, directives

and standards (electrical safety

rules and regulations, proper

recycling in accordance with the

regulations, etc.) in force in the

country of use!

• For further information on the installation

refer to the Assembly Instruction.

Electrical connection

Warning! Refer to Safety

chapters.

Warning! All electrical

connections must be made by an

authorised installer.

Electrical connection

• Before connecting, check if the nominal

voltage of the appliance, provided on the

rating plate, corresponds to the available

supply voltage. The rating plate is located

on the lower casing of the hob.

• Follow the connection diagram (it is

located on the underneath surface of the

casing of the hob).

• Use only original spare parts provided by

spare parts service.

• The appliance is not provided with a

mains cable. Buy the right one from a

• If there is no oven beneath the hob,

install a separation panel under the

appliance according to the Assembly

Instruction.

• Do not use silicon sealant between the

appliance and the worktop.

specialized dealer. Single phase or two-

phase connection requires a mains cable

of minimum 70°C temperature stability.

Cable needs mandatory end sleeves.

According to IEC regulations use for one-

phase connection: mains cable 3 x 4mm²

and for two-phase connection: mains

cable 4 x 2.5mm². Please respect specific

national regulations in the first priority.

• You must have the means for

disconnection incorporated in the fixed

wiring.

• You must have the connection and the

connecting links carried out as shown in

the connection diagram.

• The earth lead is connected to terminal

and must be longer than leads carrying

electric current.

• Secure the connecting cable with cable

clips or clamps.