Britax Steelcraft Beepa Manuale - Pagina 3

Sfoglia online o scarica il pdf Manuale per Accessori per bambini Britax Steelcraft Beepa. Britax Steelcraft Beepa 4. 4 in 1 walker

TO ADJUST HEIGHT AND USE BOUNCE FUNCTION

NOTE: The support legs can be adjusted to three

heights to allow for child's growth.

To adjust seat height turn support leg knobs to

'Lock' position. Press the buttons in whilst pushing

down on the upper tray. Find the desired height

indicated by the numbers 1 to 3 and release the

buttons to lock into position.

To use bounce function turn the leg knobs to

'Jump'.

NOTE: There are 3 foot pedal positions. 1. Front

beneath car bonnet, 2. Centre under seat and 3. Rear

behind seat.

Push button on foot pedal and slide to adjust to

desired position.

Raise the seat back rest and cover with rear flap

of seat cloth.

Insert 6 plastic seat slots into corresponding upper

plate holes.

Turn upper plate upside down, pull plastic seat

slots over plastic molding to hold seat in place.

Reverse steps A, B and C to remove seat fabric.

www.britax.com.au

G&H

PARTS LIST

1 x Upper plate includes seat

1 x Walker Car Bonnet

2 x Support Legs

1 x Lower base includes foot pedal

1 x Car windscreen

4 x Swivel Wheels

2 x Handrails

1 x Toy Fan

1 x Toy Horn

ASSEMBLY

Push the button on the foot pedal and pull backward

and engage in furthest location at the rear of the

lower base.

Align and insert the support legs into corresponding

holes on the lower base, push down until engaged.

Align and insert the support legs into the

corresponding hole of the sides of upper plate and

press until engaged.