Gantom ColorPiano Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Riflettore Gantom ColorPiano. Gantom ColorPiano 5.

What is ColorPiano?

ColorPiano is the easiest and most accessible way to record and playback a simple lighting show with a

Gantom fixture. Rather than needing an expensive lighting control system, you simply use an app to

record your desired effects directly into the light fixture. The fixture will remember the light show that

you recorded and play it back on a loop. You also have the option of using a triggered show, so the light

will only play its recorded show when a button or switch is pressed.

What is it for?

ColorPiano is for anyone who wants to create custom lighting effects but does not want the hassle and

expense of using traditional DMX theatrical lighting control systems. DMX will allow precise live control

of hundreds of fixtures, but this is not necessary if all you need is a short looping or triggered lighting

effect. ColorPiano takes the DMX lighting control out of the picture and allows you to record a short

show or effect directly into the light fixture itself.

Though it is technically possible to live control a light using ColorPiano, it is not recommended. Our

intention was for ColorPiano to be used to create short and simple prerecorded effects, not to be a

replacement for all the live functionality of a DMX theatrical light board.

What you need:



A ColorPiano compatible fixture from Gantom Lighting and Controls. Current supported fixtures

are the ColorPiano RGB and the BlinkFX MiniEmitter. Please note that there are also DMX

controllable versions of these fixtures, be mindful that you get the ColorPiano version when you

purchase your fixtures. If you think you may have the wrong version of the fixture, please

contact



An Android or iOS device for running the app. Please note that a headphone port is required to

connect to the device to the fixture. The iPhone7 does work with ColorPiano, but you will need

to use the headphone port adapter that is included with the phone.



A male-to-male 3.5mm audio 3.5mm cable. This is the same type of cable that you would use to

connect your device to headphones or to an AUX port.



Power supply for the fixture. All Gantom fixtures accept 12v DC power. We recommend using

one of our PowerPak Mini units if you are just going to power a single fixture.



The free DMX Programmer app by Gantom. This can be found by searching "Gantom" in iTunes

for an Apple device or Google Play for an Android device

ColorPiano USER GUIDE

and we can help you out!

ColorPiano User Guide

Version 1.0 – 11/29/2016