ENGLISH
At the end of this phase, an audible signal and
the fixed icon
on the display will indicate
that the oven has reached the set temperature:
at this point, place the food inside and
proceed with cooking.
Please note: Placing the food in the oven
before preheating has finished may have an
adverse effect on the final cooking result.
Residual heat
At the end of cooking, and with the function
deactivated, the icon (I+) may still be visible
on the display even when the cooling fan has
been switched off. This means there is still
residual heat in the chamber.
Note: the time needed for the icon to switch
off will depend on a series of factors such as
room temperature and the function used. In
any case, the product should be considered
OFF when the function knob indicator is on
Programming cooking
You will need to select a function before you
can start programming cooking.
DURATION
Keep pressing
until the
"00:00" start flashing on the display.
–
Use
+
or
to set the cooking time you
require, then press
Activate the function by turning the thermostat
knob to the temperature you require: an
audible signal will sound and the display will
indicate that cooking is complete and the oven
will turn off.
Notes: To cancel the cooking time you have
set, keep pressing the button
starts flashing on the display, then use to reset
the cooking time to "00:00".
This cooking time includes a preheating phase.
Programming the end cooking time/delayed
start
After a cooking time has been set, starting the
function can be delayed by programming its
end time: press
until the
current time start flashing on the display.
icon and
to confirm.
until the icon
icon and the
–
Use
+
or
o set the time you want cooking
to end and press
Activate the function by turning the thermostat
knob to the temperature you require: the
function will remain paused until it starts
automatically after the period of time that has
been calculated in order for cooking to finish
at the time you have set.
Notes: To cancel the setting, switch the oven
off by turning the selection knob to position
"0".
End of cooking
An audible signal will sound and the display
.
will indicate that the cooking function has
finished and temperature low down.
Turn the selection knob to select a different
function or to position "0" to switch the oven
off.
Please note: If the timer is active, the display
will show "END" alternately with the remaining
time.
Setting the timer
This option does not interrupt or program
cooking but allows you to use the display as a
timer, either during while a function is active or
when the oven is off.
Keep pressing
"00:00" start flashing on the display.
Use
–
+
or
to set the time you require and
to confirm.
press
An audible signal will sound once the timer
has finished counting down the selected time.
Notes: To cancel the timer, keep pressing
icon starts flashing, then use
until the
reset the time to "00:00".
to confirm.
until the
icon and
10
–
to
Stampa la pagina