IKEA LUFTIG HW400 Manuale di installazione e uso - Pagina 6
Sfoglia online o scarica il pdf Manuale di installazione e uso per Cappa di ventilazione IKEA LUFTIG HW400. IKEA LUFTIG HW400 8. Range hood
Anche per IKEA LUFTIG HW400: Manuale (16 pagine), Manuale d'uso (16 pagine), Manuale d'uso (16 pagine)
![IKEA LUFTIG HW400 Manuale di installazione e uso](/uploads/products/server2/2075308/2075308.jpg)
61833050a.fm Page 6 Tuesday, February 21, 2006 7:53 PM
1
3
2
1. Control panel.
Light
:
move the switch to the right or press the button to switch
on.
Extraction speed
:
move the switch to the right or press the next button to
increase extraction speed (or open the shutter
2. Grease filters.
3. Lamp covers(or halogen lamps, depending on the
model).
4. Telescopic flue.
Grease filters:
Metal grease filters have an unlimited
life and should be washed once a
month either by hand or in a
dishwasher at a low temperature and
in a short cycle. Washing in a
dishwasher can cause grease filters to
turn white, but this in no way affects
efficiency.
Press the handle to release the filter
Wash the filter and leave it to dry. Refit the filter in reverse
order.
Bulb/s:
Detach the lighting unit and remove
the burnt-out bulb.
Refit the filters.
Halogen bulbs:
Use a small screwdriver or any other
suitable tool to prise off the bulb cover.
Replace the bulb cover so that it clicks
into position.
Use only max 40 W
- E14 bulbs or max 20 W halogen
bulbs (depending on the model),
taking care not to touch them with
your hands.
5019 618 33050/A
4
) .
a
b
GB
Fitting or replacing the carbon filter
(filter hoods only).
Change the carbon filter every six months.
1. Remove the grease filters.
2. Fit the filters as shown in the figures below.
3. Reverse the above procedure to remove the carbon
filter.
4. Refit the grease filters.
1.
2.
CLACK!
CLEANING THE HOOD
Warning! Failure to remove oil and grease at least once a
month could lead to fire.
Use a soft cloth damped in a neutral detergent. Never use
abrasives or alcohol.
BEFORE USING THE HOOD
Please read these instructions carefully in order to get the
best out of your new hood.
Packaging materials can be dangerous for children. Keep
packaging materials (plastic bags, polystyrene, etc.) well out
of their reach.
Make sure the hood has not been damaged during transport.
Installation and electrical connections must be carried out by
a qualified technician in compliance with local safety
regulations.
1.