Ganz ZC-DWNT8922PBA Manuale di istruzioni - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per Telecamera di sicurezza Ganz ZC-DWNT8922PBA. Ganz ZC-DWNT8922PBA 2. Zc-dwt8000 series outdoor color camera

Stampa la pagina
INSTALLATION
Surface mount
Flush mount
(embedding in ceiling or wall)
* Mounting
Adaptor Ring
(optional)
* Camera Unit
(Attaching to a gang box)
*
Use the elastic band to
hang the camera unit
upon necessity for the
installation.
WARNING : Do not
release your hands
from the camera
unit until securing it.
Attention
Please use fixing screws suitable for the material of the ceiling or wall when
attaching the camera body. The mounting screws provided are not recommended
to use at all conditions.
Surface mount
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1. Drilling holes in the ceiling or wall: Use the template included to mark out the
position on the ceiling or wall where you want to install the unit.
2. When running cables through the interior of the ceiling or wall : Use the template,
and drill two or three holes for screws used to attach the camera body and one hole
for the cables (Cables).
Flush mount
- Embedding in the ceiling or wall
Be sure to use the Mounting Adaptor Ring when embedding the unit in the ceiling or wall
1. Drilling holes in the ceiling or wall : Use the template included to mark out
the position on the ceiling or wall where you want to install the unit.* Use the template,
drill 4 holes for screw used to attache the Mounting Adaptor Ring. Then, follow the
perforations on the template and cut out a hole to embed the camera body.
2. Attaching the Mounting Adaptor ring : Attach the adaptor ring to the ceiling or wall to
which you want to attach the camera body. Please use fixing screws suitable for the
material of the ceiling or wall when attaching the camera body. We recommend using
screws with a 4mm diameter.
3. Attaching the camera body : Remove the surface mount cover from the camera
body. Remove the body cover and attached camera body to the Mounting Adapter Ring.
- Attaching to gangbox
1. Remove the surface mount cover from the camera body.
2. Attaching the camera body : Attach the camera body to the gangbox.
Please use screws that are suitable for the gang box.
(Use breakable holes on the camera body bottom)
ADJUSTMENT
1. Direction and Lens
The camera body is set in a tri-axial mounting allowing movement in the
pan, tilt and rotational planes.
1) Adjust the direction of the lens so it faces the subject
2) Move the lever to adjust focus and angle of view
3) When you finished adjusting the direction of the lens, tighten the locking
screw with a screwdriver.
1)
2)
3)
Attention
T
he picture image may deteriorate when
the lens is leaned toward ceiling or wall
to view through the circled vertical area
and the effect may depending on the
view angles.
2. OSD Switch and OSD Menu
Use the Multi Tact Switch within the camerra
Direction and Enter Guide
Up
Enter
Left
Right
Down
OSD MENU FUNCTION
PRESETS
INDOOR NORMAL OUTDOOR OUTDOOR-EX
EXPOSURE
COLOR ROLL AGC D/N CONTROL SENSE-UP
SETUP
IRIS FOCUS
WHITE BALANCE
ATW1 ATW2 AWB MANUAL
IMAGE ADJUSTMENT
SHARPNESS COLOR LEVEL DNR
PRIVACY MASK ID SETUP
OTHERS
MOTION DETECTION
SAVE USER SETTINGS
RESTORE USER SETTINGS
SAVE/RESTORE
RESTORE FACTORY SETTINGS
RESET CAMERA PREV
EXIT MENU
* START MAIN MENU
Press the Middle Multi Tact Switch for about 2 seconds,
the main setup menu is displayed on the monitor screen
MAIN MENU
* A function with the icon
Select the function
>
PRESETS
<OUTDOOR..>
has sub menus.
by using the switch
EXPOSURE..
To select a sub menu,
SET UP..
select a function with
WHITE BALANCE..
Up
IMAGE ADJUSTMENT..
the icon and press
OTHERS..
the switch
SAVE/RESTORE..
Enter
Down
EXIT MENU.
1) PRESETS
Turn the Switch toward Left or Right side
Left
Right
MAIN MENU
AREA SETTING
INDOOR
NORMAL
>
AREA
<NORMAL..>
>
PRESETS
<OUTDOOR..>
NORMAL
CENTER
PREV.
SAVE.
CANCEL.
EXPOSURE..
OUTDOOR
LOWER
SET UP..
OUTDOOR-EX
WHITE BALANCE..
IMAGE ADJUSTMENT..
OTHERS..
SAVE/RESTORE..
EXIT MENU.
2) EXPOSURE
* EXPOSURE SUB MENU LIST
MAIN MENU
EXPOSURE
PRESETS
<OUTDOOR..>
>
COLOR ROLL
OFF
ON
>
EXPOSURE..
AGC
MIDDLE
HIGH
LOW
SET UP..
D/N CONTROL
AUTO..
WHITE BALANCE..
SENSE-UP
AUTO..
IMAGE ADJUSTMENT..
PREV.
SAVE.
CANCEL.
OTHERS..
SAVE/RESTORE..
EXIT MENU.
Attention
When select D/N control AUTO, AGC
is MIDDLE and HIGH selectable.
D/N CONTROL
EXPOSURE
D<->N CONTROL
COLOR ROLL
OFF
AUTO..
D-N CONTROL
LOW
MIDDLE
AGC
HIGH
N-D CONTROL
HIGH
MIDDLE
>
D/N CONTROL
<AUTO..>
B/W
PREV.
SAVE.
CANCEL.
SENSE-UP
AUTO..
COLOR
PREV.
SAVE.
CANCEL.
WARNING
Do not change
the above factory-set levels
SENSE-UP
EXPOSURE
AUTO SENSE-UP SETUP
2X
>
COLOR ROLL
OFF
AUTO..
SENSE-UP
2X
4X
8X
AGC
HIGH
PREV.
SAVE.
CANCEL.
16X
D/N CONTROL
AUTO..
32X
>
SENSE-UP
<AUTO..>
PREV.
SAVE.
CANCEL.
OFF
3) SET UP
>
DC IRIS CONTROL
AUTO
FULL OPEN
MAIN MENU
IRIS..
IRIS SPEED
0
121
255
PRESETS
<OUTDOOR..>
AI THRESH
EXPOSURE..
-48
-12
60
>
SET UP..
WHITE BALANCE..
FOCUS METER
IMAGE ADJUSTMENT..
FOCUS..
O
SET FOCUS REGION..
OTHERS..
WHITE LINE : AREA LOCATION
SAVE/RESTORE..
EXIT MENU.
GREEN LINE : AREA SCALE
RED LINE : AREA SCALE
* EXIT : Press the switch for 2 seconds.
4) WHITE BALANCE
MAIN MENU
ATW1
(wider range)
PRESETS
<OUTDOOR..>
EXPOSURE..
(narrower range)
ATW2
SET UP..
>
WHITE BALANCE..
AWB
IMAGE ADJUSTMENT..
OTHERS..
>
RED
MANUAL..
SAVE/RESTORE..
EXIT MENU.
BLUE
5) IMAGE ADJUSTMENT
MAIN MENU
PRESETS
<OUTDOOR..>
>
EXPOSURE..
SHARPNESS
-8
SET UP..
COLOR LEVEL
WHITE BALANCE..
-8
>
IMAGE ADJUSTMENT..
DNR
OTHERS..
SAVE/RESTORE..
EXIT MENU.
6) OTHERS
MAIN MENU
OTHERS
>
PRIVACY MASK SETUP..
PRESETS
<OUTDOOR..>
EXPOSURE..
ID SETUP..
SET UP..
WHITE BALANCE..
MOTION DETECTION
IMAGE ADJUSTMENT..
PREV.
SAVE.
CANCEL.
>
OTHERS..
SAVE/RESTORE..
EXIT MENU.
WHITE COLOR : AREA LOCATION
BLUE COLOR : AREA SCALE
*EXIT : Press the switch for 2 seconds.
ID SETUP
CAMERA ID SETUP
UP-LEFT
HIGH
>
OFF
ON..
ID DISPLAY
UP-CENTER
LOW
CAMERA ID:
UP-RIGHT
ID POSITION
UP-LEFT
DOWN-LEFT
DOWN-RIGHT
MOTION DETECTION SET UP
MOTION DETECTION SETUP
>
ACTIVITY THR
>
ALARM
OFF
ON..
SETUP ALARM ZONE..
>
SET ACTIVITY ZONES
ADJUST ZONE 1
WHITE LINE : AREA LOCATION
ADJUST ZONE 4
GREEN LINE : AREA SCALE
RED LINE : AREA SCALE
*EXIT : Press the switch for 2 seconds.
7) SAVE/RESTORE
MAIN MENU
SAVE/RESTORE
PRESETS
<OUTDOOR..>
EXPOSURE..
>
SAVE USER SETTINGS.
SET UP..
RESTORE USER SETTINGS.
WHITE BALANCE..
IMAGE ADJUSTMENT..
RESTORE FACTORY SETTINGS.
OTHERS..
RESET CAMERA.
>
SAVE/RESTORE..
EXIT MENU.
PREV.
-18
-20
20
13
-20
20
0
8
0
8
LOW
MIDDLE
MIDDLE
HIGH
PRIVACY MASK
MASK 1 ON.. OFF
MASK 6
OFF ON..
MASK COLOR
WHITE
BLACK
RED
0
25
255
1 ZONES
1 ZONES
1-2 ZONES
1-3 ZONES
1-4 ZONES
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp