Ganz ZC-YX270PE Manuale di istruzioni - Pagina 10
Sfoglia online o scarica il pdf Manuale di istruzioni per Telecamera di sicurezza Ganz ZC-YX270PE. Ganz ZC-YX270PE 12. Color/day&night camera zc-yx series; zc-nx series
Stampa la pagina
SPECIFICATIONS
EDR Type
Model No.
TV system
Scanning system
Image sensor
Effective pixels
Scanning frequency
Video output
Horizontal resolution
Min. Illuminance
50IRE
F1.2
Night mode
30IRE
AGC Extreme
S/N ratio
Gamma characteristic
Sync. System
Electronic shutter
Iris control
Extended Dynamic Range (EDR)
Backlight Compensation (BLC)
White balance
SENS UP
Day/Night setting
Noise Reduction (2D/3D-DNR)
Electronic zoom
Defog
Profile setting
AGC
ALC
HLC
Easy focus
Privacy Mask
Motion detection
Stabilizer
Monitor output mode
Communication function
Power source
Power consumption
Operating temperature/humidity
Storage temperature/humidity
External dimensions
Weight
Input/Output
Video output
terminals
Auto-iris terminal
Power supply terminal
B/W Mode-Fix terminal
RS485 communication terminal
UTP terminal
Adjustment switch
OSD switch
Iris mode switching switch
Termination resistance switch
UTP/BNC switching switch
Accessories
* The specifications and/or appearance of the product may change without a prior notice.
ZC-YX270P
SENS UP: OFF
SENS UP: ON (x512)
SENS UP: OFF
SENS UP: ON (x512)
DC IRIS
AES
AIC
VIDEO IRIS
RS485 communication, half duplex (models
with communication function only)
24 V AC ± 10%
(50/60 Hz ± 1 Hz)
or 12 V DC ± 10%
12 V DC
24 V AC
220mA, 3.1W
230 V AC
2P screwless
terminal block
AWG16-24
2P screwless terminal block AWG22-26
4P screwless terminal block AWG22-
26 (models with communication
communication function only)
Digital Day/Night model
ZC-YX270PE
1/3-type Interline transfer CCD
15.625kHz (H) / 50.0Hz (V)
1.0V (p-p) / 75Ω
0.3 lx (Color) /
0.03 lx (B/W)
0.0006 lx (Color) / 0.00006 lx (B/W)
0.15 lx (Color) /
0.015 lx (B/W)
0.0003 lx (Color) / 0.00003 lx (B/W)
More than 50dB (At AGC Off)
Internal synchronization (INT.) / Line Lock (L.L.)
Electronic shutter ON: 1/50 s to 1/100,000 s.
* The shutter speed ranging from 1/1,000 s to 1/5,000 s can be set by 1/500 s.
1/50 sec. fixed (Flickerless: OFF), 1/120 sec. fixed (Flickerless: ON)
Fixed iris lens (1/50-1/100,000 sec. automatic electronic shutter)
Control of electronic shutter and iris (1/50-1/100,000 sec.)
Video-drive auto-iris lens
Vcc = 9.4 V DC, 50mA max, video signal: 0.7V (p-p) (high impedance)
ATW (Normal / Wide) / AWB / Manual
ON: Auto (x2 to x512) / OFF
Auto / Color Fix / B/W Fix
Extreme / High / Middle / Low
ON (16 times max.) / OFF
Image correction ON / OFF
standard / high sensitivity / casino / sodium vapor lamp / profile
ON (Extreme / High / Middle / Low) / OFF
Detection level: 1-3 steps
ON (16 spots max., 10 colors, mosaic) / OFF
Detects all areas. 6 (horizontal) × 4 (vertical),
24 pixels in total (minimum block), sensitivity (1–10)
230 V AC ±10%
(50Hz ± 1Hz)
260mA
-
-
-
25mA, 3.6W
-10°C to +50°C, 85% or lower humidity (no condensing)
-20°C to +60°C, 95% or lower humidity (no condensing)
60 (W) x 54 (H) x 119.4 (D) mm
320g
600g
BNC
4P connector (D4-157J-250/equivalent)
2-core 2.0m cord
function only)
-
Push-button switch with 5 contact points (in 4 directions and at a central point)
Slide switch (models with
-
OSD Operation Manual, Instruction manual (this document)
EG-10
True Day/Night model
ZC-YX270PU
ZC-NX270P
PAL
2:1 Interlace
976 (H) × 582 (V)
BNC 1.0V(p-p)/
75 Ω/UTP
700 TVL
0.07 lx (Color) /
0.00014 lx (Color) / 0.000015 lx (B/W)
0.035 lx (Color) /
0.00007 lx (Color) / 0.000007 lx (B/W)
0.45
DC-drive auto-iris lens
ON / OFF
ON / OFF
-20 to +20
Enabled
ON / OFF
CRT / LCD
-
RS485 communication, half duplex (models
with communication function only)
24 V AC ± 10%
24 V AC ± 10%
(50/60 Hz ± 1 Hz)
(50/60 Hz ± 1 Hz)
or 12 V DC ± 10%
or 12 V DC ± 10%
260mA
260mA
220mA, 3.1W
220mA, 3.1W
-
-
330g
320g
BNC / 2p terminal
2P screwless
2P screwless
terminal block
terminal block
AWG16-24
AWG16-24
-
2P screwless terminal block AWG22-26
-
4P screwless terminal block AWG22-
26 (models with communication
2P screwless
terminal block
AWG22-26
Slide switch
-
Slide switch (models with
communication function only)
Slide switch
ZC-NX270PE
1.0V (p-p) / 75Ω
0.007 lx (B/W)
0.0035 lx (B/W)
230 V AC ±10%
(50Hz ± 1Hz)
-
-
25mA, 3.6W
600g
BNC
2-core 2.0m cord
function only)
-
-