HIKVISION TURBO HD U7T Series Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Telecamera di sicurezza HIKVISION TURBO HD U7T Series. HIKVISION TURBO HD U7T Series 15. Turret & dome camera
Anche per HIKVISION TURBO HD U7T Series: Manuale d'uso (15 pagine), Manuale d'uso (15 pagine)
Stampa la pagina
Note:
Drill the cable hole (hole A) when adopting the ceiling
outlet to route the cable.
3. Loosen the screws on the bubble of the dome camera
to remove the bubble.
Figure 2-8 Remove the Bubble and the Black Liner
4. Attach the back box of camera to the ceiling and
secure them with supplied screws.
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below to get
an optimum angle.
8. Fit the bubble back to the camera.
Figure 2-7 The Drill Template
Figure 2-9 Attach the Back Box
0° to 75°
Figure 2-10 3-Axis Adjustment
0° to 355°
0° to 355°