Briteq BEAMSPOT1-DMX WW Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Apparecchiature di illuminazione Briteq BEAMSPOT1-DMX WW. Briteq BEAMSPOT1-DMX WW 12.

ENGLISH

SETUP MENU / HOW TO SETUP

With the setup menu you can fully configure the projector. All settings are preserved when the unit is

disconnected from the mains.

 To select any of the functions, press the MODE button until the required function is shown on the display

or use the ▲/▼buttons to browse the menu.

 Select the function with the ENTER button.

 Use ▲/▼buttons to change the values.

 Once the required value is selected, press the ENTER button to confirm.

DMX ADDR

Used to set the desired DMX-address.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the [ENTER] button: the DMX value can now be changed

 Use ▲/▼buttons to select the desired DMX512 address. The last occupied DMX-address is also shown:

this makes it easier to set the address of the next unit in the chain.

 Once the correct address shows on the display, press the [ENTER] button to save it.

Note: on RDM-compatible controllers this option can also be remotely set.

CHANNEL MODE

Used to set the desired channel mode.

 Press the [MENU] button or ▲/▼buttons until the desired function is showing on the display.

 Press the [ENTER] button: the values can be changed

BRITEQ

4/9

BEAMSPOT1-DMX NW (WW)

OPERATION MANUAL