Avantco 177AG24RC Installazione Funzionamento e manutenzione - Pagina 6
Sfoglia online o scarica il pdf Installazione Funzionamento e manutenzione per Attrezzature per alimenti commerciali Avantco 177AG24RC. Avantco 177AG24RC 17. Manual griddles, radiant charbroilers, hot plates
Stampa la pagina
Instructions are for conversion from Natural Gas to Propane (L.P.) on all models. The
conversion should be done before connecting the unit to the gas supply.
Units are shipped from the factory equipped for use on natural gas. Orifices necessary for LP
(propane) are provided in a bag tied to the valve on the front panel.
1. Remove the trivets from the top
of the appliance.
2. Remove the burner from the top
of the gas pipe.
3. Replace the orifice fittings into
the valve. Note: Unit Number on
side of orifice fittings.
4. Install the front panel knobs.
5. Before installing the regulator,
unscrew the octagonal cap,
up you can read (NAT) on the
plastic insert out of the cap, flip
it over and snap back in.
6. Continue with installation.
Page |
6
CONVERSION
Orifice Fittings
Regulator with Brass Cap
L.P Position of Insert
Plastic Insert