Avantco 360CPT40 Manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso per Attrezzature per alimenti commerciali Avantco 360CPT40. Avantco 360CPT40 10. Countertop refrigerated prep rails
User Manual
Loading Food Pans
Countertop units are designed to function with all pans in place, even if some pans are to be left
empty. For maximum food freshness, fill the pans only with an amount that can be used in a specific
usage period. During non-use, please close the insulated lid cover or remove all food.
Temperature Controls
Control
• Refrigerant LED - Compressor is on
• Fan LED - Fan is on
• Defrost LED - Defrost cycle is running
set
Functions
Adjusting the Temperature
Your new refrigerator is already factory-set to run at optimum temperatures for food safety and
should require no adjustments.
Refrigerators are set to cycle between a minimum temperature of 33°F and a maximum
temperature of 40°F.
Adjusting the temperature changes the minimum temperature your unit will run at. Your unit will not
run constantly at this setting. To change it, follow these instructions:
Digital Control Units
• Hold "SET" for 1 sec. The display will flash the current minimum temperature.
• Use the arrow buttons to adjust the minimum temperature you want it to run at.
• Press "SET" again to save your settings.
Always remember to calculate the differential if you change the minimum temperature setting. The
cabinet temperature will fluctuate up to +7 degrees over your set minimum temperature as the
compressor runs and shuts off. Setting the temperature too high will result in unsafe maximum
temperatures and possible health code violations.
- 5 -