IKEA MDB7749SAW0 Manuale di istruzioni per l'installazione - Pagina 18
Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Lavastoviglie IKEA MDB7749SAW0. IKEA MDB7749SAW0 48. Undercounter dishwasher stainless steel tub
Stampa la paginaIMPORTANT: If wheels were removed, cover the floor when
moving the dishwasher to avoid damage to the floor. Slowly move
dishwasher completely into cabinet opening. Do not kink or pinch
water line, drain hose, power supply cord or direct wire between
dishwasher and cabinet. Remove cardboard from under
dishwasher.
NOTES:
•
It is all right if dishwasher fits tightly into cabinet opening. Do
not remove insulation blanket-
the blanket reduces the sound
level.
•
If using power cord, make sure to route end through hole in
cutout before sliding dishwasher into cabinet opening.
Align front of dishwasher door panel with front of cabinet doors.
You may need to adjust alignment to be even with your cabinets.
Check that leveling legs are firmly against the floor. Close and
latch the door, and place level against the front panel. Check that
dishwasher is centered from front to back in the opening. If
needed, adjust leveling leg until dishwasher is plumb. Repeat for
other side of dishwasher.
Helpful Tip: Push up on front of dishwasher to raise dishwasher
off the ground to adjust front legs. With some installations, it may
be easier to adjust the front leg using the ¾6" hex head socket or
adjustable wrench.
Place level against top front opening of tub. Check that
dishwasher is level from side-to-side.
If dishwasher is not level,
adjust front legs up or down until dishwasher is level. Close the
dishwasher door.
Copper tubing only: Slide nut, then ferrule, about 1" (2.5 cm) onto
copper tubing.
18