IKEA W10448829A Istruzioni per l'utente - Pagina 8

Sfoglia online o scarica il pdf Istruzioni per l'utente per Lavastoviglie IKEA W10448829A. IKEA W10448829A 40.

Stampa la pagina

Toaddrinse aid, t urn thedispenser

cap to"Open" andliftoff.Pour r inse

aidintotheopening u ntil t he

indicator level isat"Full." R eplace

thedispenser capandturn to

"Lock." M ake sure capisfully

locked.

NOTE: Formost w ater c onditions, the

factory s etting w illgive good results. If

youhave hard water o rnotice rings or

spots, tryahigher setting. Turn the

arrow adjuster inside t hedispenser by

either u sing your f ingers o rinserting a

flat-blade screwdriver intothecenter of

thearrow andturning.

1/4turn to lock

STEP3

Select a Cycle (cycles vary by model)

Press the Select Cycles button until the light below the desired

cycle is on.

NOTE: Heavier cycles and options affect cycle length. Some

cycles and options will take up to 31/2hours to complete.

Heavy-

Use for heavily

soiled, hard-to-clean

items.

HEAVY NORMALECO

Normal - Use for normal

•

food soil. The energy usage

label is based on this cycle.

L__J

ECO - Use for lightly soiled

items. It saves energy.

1-Hour

Wash

- Use for

lightly soiled items. For fast

RmNSE

1 HOUR

ONLY

•

CYCLE

results, 1-Hour Wash will clean the dishes using slightly more water

and energy.

Rinse Only - (no options apply to this cycle) Do not use detergent.

This is only a rinse that keeps food from drying on your dishes and

reduces odor buildup in your dishwasher until you are ready to

wash a full load.

Select Options (options vary by model)

You can customize your cycles by pressing the options desired.

Repeatedly press the button until the

desired combination

of options is

selected.

Hi Temp - (use only with Heavy and

Normal wash cycles) heats the water

during the wash portions of the cycle.

SANI

HEAT

DELAY

TEMP

RINSE

DRY

WASH

OPTIONS

Sani Rinse - (use only with Heavy and Normal wash cycles) Select

this option to raise the water temperature in the final rinse to

approximately

155°F (68°C). Sani Rinse option adds heat and time

to the cycle. This high temperature rinse sanitizes your dishes and

glassware in accordance with NSF/ANSI Standard 184 for

Residential Dishwashers. Certified residential dishwashers are not

intended for licensed food establishments.

Heat Dry - (use only with 1-Hour Wash, Heavy and Normal wash

cycles) When selected with the 1-Hour Wash cycle, the time is

increased by approximately

30 minutes.

Delay Wash - (any cycle) offers the choice to start the dishwasher

automatically at a later time. Select a wash cycle and options.

Press Delay Wash. Press START/RESUME. Close the door firmly.

Lock-

(on Delay Wash button) use to avoid unintended use of your

dishwasher. When Control Lock is lit, all buttons are disabled. The

dishwasher door can be opened while the controls are locked.

To turn on Lock:

Press and hold Delay Wash for at least 3 seconds. The Locked light

glows. If you press any pad while your dishwasher is locked, the

light flashes 3 times.

To turn off Lock:

Press and hold Delay Wash for at least 3 seconds. The Control

Lock light turns off.

STEP4

Start or Resume

a Cycle

•

Run hot water at the sink nearest your dishwasher until the

water is hot. Turn off water.

•

Push door firmly closed. The door latches

automatically. Select the wash cycle and options

Start

desired OR press START/RESUME to repeat the

Resume

same cycle and options as in the previous wash

cycle. For top controls, select cycle and options

o_o°_"°o,.

first, and then close the door.

•

You can add an item anytime before the main

,._oo Voo

wash starts. Open the door slowly and add the

item. Close the door firmly. Press START/

RESUME.

The Clean indicator glows when the cycle is

finished. Sanitized glows when Sani Rinse

option is selected and sanitization levels

occur.

Clean

Sanitized