BERNHARDT design a.k.a. Easel base Manuale di istruzioni - Pagina 16
Sfoglia online o scarica il pdf Manuale di istruzioni per Arredamento per interni BERNHARDT design a.k.a. Easel base. BERNHARDT design a.k.a. Easel base 20.
Stampa la pagina
a.k.a. overhead loop support
and tower deck assembly
The illustrations shown on this page show
the final process of the deck assembly
Align the top and front of the overhead to
the tower. Use clamps to keep the units
together to ensure proper alignment.
Use a 3/8" drill bit to drill through the top
shelf pin hole and through the side panel
on the overhead.
Use caution not to blow
out the inside face of the overhead.
Once holes are drilled, insert sex bolts and
tighten while making sure the front and
top edges are aligned and flush.
Remove clamps and assembly is
complete. Lift and move assembly into
place.
Note: It is better to install any lighting
and run the wires through the provided
wireway holes on the wood deck panel
before the assembly is moved back to
the wall.
Completed assembly