ALIBI ALI-BC700G Manuale di installazione rapida
Sfoglia online o scarica il pdf Manuale di installazione rapida per Telecamera di sicurezza ALIBI ALI-BC700G. ALIBI ALI-BC700G 3. Ali-bc700 series infrared bullet cameras
Stampa la pagina
ALI-BC700 Series Infrared Bullet
Cameras Quick Installation Guide
For Products: ALI-BC700G, ALI-BC700VFG
The ALIBI ALI-BC700 series indoor/outdoor bullet cameras include a new generation sensor with high
sensitivity and advanced circuit design technology. They feature high resolution, low image distortion and
low noise features which makes them suitable for both surveillance and image processing systems.
Features
High resolution color sensor: 700 TV Lines
•
2.8 - 12 mm Varifocal lens (ALI-BC700VFG only)
•
12 Vdc power
•
IR LED enables the day/night surveillance
•
IR cut filter auto switch
•
True day/night
•
High color rendition
•
Weather protection: IP66 rated
•
Mounting Bracket
Adjustments
Camera body
ALI-BC700G Cameras
Mounting base
Sun shield
Integrated
Mounting Bracket
ALI-BC700VFG Camera
Video BNC
Connector
ALI-BC700 series cameras drop cable connectors
www.observint.com
1
Mounting base
Lens
IR LED Array
IR LED Array
Focus - zoom
Vari-focal Lens
adjustments
(2.8 mm - 12 mm)
Power
Connector
What's in the box
Camera assembly
•
Mounting hardware
•
This instruction guide
•
Drill template
•
ALIL-BC700G (left) and ALI-BC700VFG drill templates
Tools you need
To install the camera, you will need:
12 Vdc power source. See Specifications for wattage requirement.
•
Tools and additional fasteners (may be required) for mounting the camera
•
Phillips screwdriver
•
Video and power extension cable
•
CCTV video setup monitor (optional)
•
Installation
Before installation:
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
•
provide the rated voltage and wattage for the camera. See the Specifications section.
During installation:
Camera Lens: Handle the camera carefully to prevent scratching or soiling the lens. If the lens or IR
•
array shield becomes soiled, clean it only with approved products. See the
Monitor impedance: Set the monitor impedance switch to 75 Ω.
•
Power supply: Camera drop cable: The camera drop cable includes two connectors:
•
Video BNC connector: For transmission of the video signal across a coax (75 Ω) extension cable.
—
Power connector: When applying Vdc power, observe the power polarity. See the picture below
—
for the connector polarity configuration.
Mounting the camera
An ALI-BC700 series camera can be mounted on a wall or ceiling that has sufficient strength to support it.
The video/power drop cable from the camera can be routed either through mounting surface or through a
cable guide on the edge of the mounting base.
ALI-BC700G camera typical ceiling mounting
section.
Cleaning
ALI-BC700_CQ
7/7/14