Avantco 178GF50HC Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Congelatore Avantco 178GF50HC. Avantco 178GF50HC 6.

User Manual

Troubleshooting

Compressor is Not Running

Fuse blown or circuit breaker tripped.

Power cord unplugged.

Thermostat set too high.

Cabinet in defrost cycle.

Condensing Unit Runs for Long Periods of Time

Excessive amount of warm product placed in cabinet.

Prolonged door opening or door ajar.

Dirty condensor coil.

Evaporator coil iced over.

Cabinet Temperature is too Warm

Thermostat is set too warm.

Airflow is blocked.

Excessive amount of warm product placed in the cabinet. Allow adequate time for product to cool down.

Fust blown or circuit breaker tripped.

Dirty condensor coil.

Prolonged door opening or door ajar.

Replace fuse or reset circuit breaker.

Plug in power cord

Set thermostat to lower temperature.

Wait for defrost cycle to finish.

Allow adequate time for product to cool down.

Ensure doors are closed when not in use. Avoid opening

doors for long periods of time.

Clean the condensor coil.

Unplug unit and allow coil to defrost. Make sure

thermostat is not set too cold. Ensure that door gasket(s)

are sealing properly.

Set thermostat to lower temperature.

Re-arrange products to allow for proper air flow. Make

sure there is at least four inches of clearance from the

evaporator.

Replace fuse or reset circuit breaker.

Clean the condensor coil.

Ensure doors are closed when not in use. Avoid opening

for long periods of time.

- 6 -