Makita 2012NB Manuale di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 2012NB. Makita 2012NB 20. Thicknesser
Anche per Makita 2012NB: Manuale di istruzioni (13 pagine), Manuale di istruzioni (14 pagine), Manuale di istruzioni (13 pagine), Manuale di istruzioni (17 pagine)

Installing blades

CAUTION:

Use only Makita socket wrench provided to tighten the blade installation bolts. The use

of any other socket wrench may cause overtightening or insufficient tightening of the

bolts, resulting in severe injury.

Provide

flat wood block approx.

300 mm (11-13/16") long and 100 mm

(3-1 5/16") wide. Place the blade and the

set

plate on the wood block

that the

blade locating lug of the set plate rests

in the groove of the blade. Adjust the set

plate so that both ends of the blade pro-

trude approx. 1 mm (3/64") beyond the

end of the set plate. Place the two mag-

netic holders on the set plate and push

them until the claw contacts the blade.

Grip the magnetic holder and slip the

heel of the set plate into the groove in

the drum. Install the blade installation

bolts.

After tightening all the blade installation

bolts lightly and evenly from the center

to the outside, tighten them completely

following the same sequence. Remove

the magnetic holders from the set plate.

Magnetic holder

- ,

Blade

% : : t i c

Blade installation

Socket wrench