Makita 3606 Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 3606. Makita 3606 17. Makita 3606 plunge router: specifications
Anche per Makita 3606: Ripartizione delle parti (2 pagine)

Stampa la pagina

1. Base plate

2. Templet guide

3. Screw

1. Bit

2. Base

3. Templet

4. Workpiece

5. Distance (X)

6. Outside diameter of the templet

guide

7. Templet guide

Templet guide (optional accessory)

003687

The templet guide provides a sleeve through which the bit

passes, allowing use of the tool with templet patterns.

To install the templet guide, loosen the screws on the tool

003691

base, insert the templet guide and then tighten the screws.

Secure the templet to the workpiece. Place the tool on the

003695

templet and move the tool with the templet guide sliding

along the side of the templet.

NOTE:

•

The workpiece will be cut a slightly different size from the

templet. Allow for the distance (X) between the bit and

the outside of the templet guide. The distance (X) can be

calculated by using the following equation:

Distance (X) = (outside diameter of the templet guide –

bit diameter) / 2

Trimmer guide (optional accessory)

003697

Trimming, curved cuts in veneers for furniture and the like

can be done easily with the trimmer guide. The guide roller

rides the curve and assures a fine cut.