Garage Smart Hard Top Lifter Manuale d'uso - Pagina 17
Sfoglia online o scarica il pdf Manuale d'uso per Sistemi di sollevamento Garage Smart Hard Top Lifter. Garage Smart Hard Top Lifter 20.
Stampa la pagina- 1. Table of Contents
- 2. Safety Information/About Hardtop Lifter
- 3. Product Identifier
- 4. What's in the Box
- 5. Hardtop Lifter Installation Tools and Notes
- 5. Step 1: Smarttrack
- 5. Smarttrack Troubleshooting
- 5. Step 2: Assembly - Length Adjuster
- 5. STEPS 3 & 4: ASSEMBLY - WIDTH ADJUSTER and FOAM BLOCKS
- 5. Step 5: Assembly - Pulley Slider
- 5. Step 6: Assembly - Vehicle Installation
- 5. Step 7: Assembly - Cargo Net and Configuration
- 5. Step 8: Assembly - Adjustments
- 6. Faqs
- 7. Warranty
HARDTOP LIFTER INSTALLATION
8. HardTop Lifter Adjustments (cont.)
3. If the hard top is leaning forward, move the vehicle and lower
the hardtop to the floor. Move the pulley sliders forward a little,
without changing the frame length adjustment; re-pin then lift
again. If leaning backward, move the sliders back.
4. Repeat until the load is balanced. (Adjustments are only
necessary during setup. Subsequent removals should not need
any adjustment.)
5. Lift to the ceiling. Set the "Upper Smart Point" in the App. Refer
to the MyLifter Manual for App instructions.
CAUTION
Do NOT run the Pulley Sliders into the myLifter.
ADJUSTMENTS
15