Garage Smart UNIVERSAL LIFTER Manuale d'installazione e d'uso - Pagina 20

Sfoglia online o scarica il pdf Manuale d'installazione e d'uso per Sistemi di sollevamento Garage Smart UNIVERSAL LIFTER. Garage Smart UNIVERSAL LIFTER 20.

Stampa la pagina

Make sure the cable is as vertical as possible from the lifter to the first pulley

and from the second pulley to the carabiner. Improperly aligned cables could

result in damage to the MyLifter motor and to your property and could cause

personal injury. Move the carabiner to other holes if necessary to achieve the

proper alignment.

11. Use the Manual Lift and Manual Lower arrows to adjust the cable until it is taut, but

still has not lifted the item off the floor.

12. With the item on the floor, tap the Set Low button (

A dialog box opens asking if you are sure that you want to set the current cable

position to the smart low point.

13. Tap Set to set the smart low point.

14. Press the Manual Lift arrow to lift the item a few inches off the floor. Make sure that

the lifting straps are secure and that the item is level.

15. Make strap and frame adjustments as needed to secure and balance the load.

16. Press and hold the Manual Lift arrow to lift the item to the ceiling, leaving six inches

of ceiling clearance.

When you use the Manual Lift Up button, make sure you do not run the pulley frame

into the MyLifter. Running the pulley frame into the lifter could cause damage to the

lifter, damage personal property, or cause personal injury.

17. Tap the Set High button (

A dialog box opens asking if you are sure that you want to set the current cable

position to the smart high point.

18. Tap Set to set the smart high point.

With your smart high and smart low points set:

 One tap on the Smart Lower button (

set.

 One tap on the Smart Lift button (

CAUTION

) lowers the item to the low point you

) lifts the item to the high point you set.