Makita 3706 Manuale di istruzioni - Pagina 6
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 3706. Makita 3706 17. Cutout tool
Anche per Makita 3706: Manuale di istruzioni (14 pagine), Manuale di istruzioni (10 pagine), Manuale delle parti (2 pagine), Manuale di istruzioni (13 pagine), Manuale di istruzioni (12 pagine)
Stampa la pagina
FUNCTIONAL
DESCRIPTION
1. Shoe
2. Thumb screw
OFF
1
1. Switch lever
2. Bump off switch
ASSEMBLY
6
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Adjusting depth of cut
001624
To adjust the shoe, turn the thumb screw to loosen. Slide the
1
shoe to the desired position and tighten the thumb screw
2
securely. Check for the proper clearance beneath the work-
piece before cutting so that the bit will not strike a hard sur-
face such as the floor, workbench, etc.
Switch action
CAUTION:
•
Before plugging in the tool, always check to see that the
switch lever actuates properly and returns to the ''OFF''
position.
To start the tool, move the switch lever to the ''ON'' position.
001625
To stop the tool, move the switch lever to the ''OFF'' position.
ON
This can be done in the forward area of the switch lever or by
2
bumping off the rear area of the switch lever.
CAUTION:
•
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing bit
CAUTION:
•
Do not tighten the collet nut without inserting a bit, or the
collet cone will break.