Makita 3707F Manuale di istruzioni - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 3707F. Makita 3707F 13. Trimmer
Anche per Makita 3707F: Specifiche tecniche (2 pagine), Manuale di istruzioni (16 pagine), Manuale di istruzioni (17 pagine), Manuale di istruzioni (10 pagine)
![Makita 3707F Manuale di istruzioni](/uploads/products/server2/2090040/2090040.png)
001712
Trimmer guide
001713
Trimming, curved cuts in veneers for furniture and the
like can be done easily with the trimmer guide. The guide
roller rides the curve and assures a fine cut.
Install the trimmer guide on the tool base with the clamp
screw (A). Loosen the clamp screw (B) and adjust the
distance between the bit and the trimmer guide by
turning the adjusting screw (1 mm per turn). At the
desired distance, tighten the clamp screw (B) to secure
the trimmer guide in place.
1
2
3
001714
When cutting, move the tool with the guide roller riding
the side of the workpiece.
1
001998
1. Nail
2. Center hole
3. Straight guide
1
2
3
1. Adjusting screw
2. Clamp screw (B)
4
3. Trimmer guide
4. Clamp screw (A)
1. Workpiece
2
2. Bit
3. Guide roller
3
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
1
2
001999
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
8
1. Limit mark
1
1. Screwdriver
2. Brush holder
cap