Makita 4131 Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 4131. Makita 4131 12. Metal cutter
Anche per Makita 4131: Manuale di istruzioni (14 pagine), Manuale di istruzioni (12 pagine), Manuale di istruzioni (12 pagine), Manuale di istruzioni (12 pagine)

Stampa la pagina
Makita 4131 Manuale di istruzioni
1
1. Sight window
1
1. Dust cover
2. Knob

MAINTENANCE

1. Limit mark
•
Always use the carbide-tipped saw blades appropriate for your job.
The use of inappropriate saw blades may cause a poor cutting
performance and/or present a risk of personal injury.
Chip disposal
005355
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
removing or installing the dust cover.
•
The dust cover may become hot due to hot chips. Do not touch the
cutting chips or dust cover with your bare hand.
When the cutting chips are visible through the sight window, dispose of them.
Push and turn the knob clockwise to the
005347
Dispose of the cutting chips accumulated inside the dust cover.
2
CAUTION:
•
Do not turn the tool upside down. The cutting chips accumulated inside
the dust cover may fall out of the dust cover.
•
Handle the dust cover carefully so that it will not be deformed or
damaged.
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
attempting to perform inspection or maintenance.
Inspecting saw blade
•
Check the blade carefully for cracks or damage before and after each
use. Replace a cracked or damaged blade immediately.
•
Continuing to use a dull blade may cause a dangerous kickback and/or
motor overload. Replace with a new blade as soon as it no longer cuts
effectively.
•
Carbide-tipped saw blades for metal cutter cannot be re-sharpened.
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly. Replace when they wear
down to the limit mark. Keep the carbon brushes clean and free to slip in the
holders. Both carbon brushes should be replaced at the same time. Use only
identical carbon brushes.
1
symbol and remove the dust cover.
9