Makita 4328 Informazioni tecniche - Pagina 4

Sfoglia online o scarica il pdf Informazioni tecniche per Utensile elettrico Makita 4328. Makita 4328 7. Jig saw
Anche per Makita 4328: Manuale di istruzioni (13 pagine), Specifiche tecniche (2 pagine), Manuale di istruzioni (13 pagine), Manuale di istruzioni (13 pagine), Manuale di istruzioni (13 pagine)

epair

[5] Assembling Gear Section

Refer to Figs. 4 and 4a.

1) Assemble Armature ass'y to Bearing case complete.

2) As for 4326, 4326M, 4327, 4327M and M438, mount Thrust plate on Bearing case complete. (Fig. 4)

As for 4328, 4329 and M439, after inserting Thrust plate to Dust seal, mount them on Bearing case complete. (Fig. 4a)

3) Connect Armature shaft gear and the pin of Bearing case complete to Gear complete through the holes of Balance plate.

As for 4328, 4329 and M439, fit Retaining ring S-6 into the groove of the pin of Bearing case complete using 1R291.

4) Face the collar side of Collar sleeve to Gear complete, and mount Collar sleeve on Gear complete.

5) Put Collar sleeve into the hole of Slider section after assembling the components.

[5] Removing Armature ass'y

Remove Armature ass'y from Bearing case complete using 1R269 as illustrated in Fig. 5.

Fig. 5

Armature ass'y

[6] Removing Lever 18 (only for 4328, 4329 and M439)

Refer to Fig. 6.

1) Remove Stop ring E-4 behind Lever 18 using a slotted screwdriver.

2) Align Lever 18 with III mark on Housing set and pull out Lever 18.

Steel ball 4 and Compression spring 4 can be removed.

Fig. 6

Bearing case complete

1R269

III mark

Lever 18

P 4 / 7