Makita 4329 Manuale di istruzioni - Pagina 2
Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita 4329. Makita 4329 13. Jig saw
Anche per Makita 4329: Manuale di istruzioni (13 pagine), Specifiche tecniche (2 pagine), Informazioni tecniche (7 pagine), Manuale di istruzioni (13 pagine), Manuale di istruzioni (13 pagine)
![Makita 4329 Manuale di istruzioni](/uploads/products/server2/2091890/2091890.jpg)
ENGLISH
SPECIFICATIONS
Model
Length of stroke
Blade type
Max. cutting
capacities
Strokes per minute (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・
Read instruction manual.
・
DOUBLE INSULATION
・
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Wood
Mild steel
-1
)
217 mm (Steel base type)
223 mm (Aluminum base type)
1.8 kg (Steel base type)
1.9 kg (Aluminum base type)
equipment
and
environmentally
compatible
4326
18 mm
65 mm
6 mm
3,100
217 mm (Steel base type)
223 mm (Aluminum base type)
1.8 kg (Steel base type)
1.9 kg (Aluminum base type)
/II
END201-3
For European countries only
Noise
The typical A-weighted noise level determined according
to 60745-2-11:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Vibration
The
vibration
determined according to EN60745-2-11:
Work mode : cutting chipboard
its
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
EC-DECLARATION OF CONFORMITY
ENE019-1
Model; 4326, 4327, 4328, 4329
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
ENF002-1
000230
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
2
4327
18 mm
18 mm
B type
65 mm
65 mm
6 mm
500 - 3,100
500 - 3,100
217 mm
1.8 kg
/II
) : 83 dB(A)
pA
Wear ear protection.
total
value
) : 7 m/s
h,CW
2
) : 5 m/s
h,CM
2
CE2006
Tomoyasu Kato
Director
4328
4329
18 mm
65 mm
6 mm
6 mm
500 - 3,100
223 mm
1.9 kg
/II
/II
ENG101-1
ENG220-1
(tri-axial
vector
sum)
2
ENG304-1
2
ENH101-7