GarageAce ET30 Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Apriporta del garage GarageAce ET30. GarageAce ET30 18. Rolling garage door opener

3. Installation instructions

IMPORTANT SAFETY INSTRUCTIONS FOR

INSTALLATION

Warning：Incorrect installation can lead to severe

injury. Follow this installation instruction.

SIDE ROOM REQUIREMENTS

Fig. 1 shows the minimum and recommended side

room. The distance between the edge of the door

curtain and the inside of the bracket must be at least

40mm. However, for easier access it is

recommended that at least 95mm is allowed．

1. CHECK OPERATION OF DOOR

BEFORE BEGINNING THE INSTALLATION CHECK THE OPERATION OF THE DOOR

The door must be well balanced and be in a reasonable operating condition. The ideal operational effort in

raising or lowering the door should not exceed a force of l0kg (22 lbs．)．Make sure that all door locks, ropes,

chains etc. are neither released, nor disabled and remove unnecessary accessories．

2. FIX

2. FIXING OF DOOR WEIGHT BAR (OPTIONAL)*

*Optional extra – not required for majority of

installations

Move the door manually to the mid open position.

Place the weight bar on the bottom rail, in the middle

of the door and secure with the fasteners provided

(FIG. 2). Check the operation of the door again. If the

door feels heavy it may require extra tension to be

added to the door springs ． Refer to the door

Installation manual from the manufacturer on how to

tension the door.

3. INSTALLING OPERATOR

The ET-30 roller door operator can be fixed to the roll up garage door in a variety of ways. Described below is

one method of fixing. Make sure there is enough side room to slide the drive assembly onto shaft.