CORNING ClearCurve SRP-005-065 Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Cavi e connettori CORNING ClearCurve SRP-005-065. CORNING ClearCurve SRP-005-065 4. Drop cable pulling grip kit

Stampa la pagina

revision history |

Issue

Date

February 2009

Related literature |

SRP-005-065 Corning Cable Systems ClearCurve™ Rugged/Compact Drop Cable

Handling Practices

Precautions |

CAUTION: Use care when using scissors to avoid personal injury. The use of safety gloves

and safety glasses is recommended.

WARNING: Laser light can damage your eyes. Laser light is invisible. Viewing it directly

does not cause pain. The iris of the eye will not close involuntarily as when viewing a

bright light. Consequently, serious damage to the retina of the eye is possible. NEVER

LOOK INTO A FIBER WHICH MAY HAVE A LASER COUPLED TO IT.

Should accidental eye exposure to laser light be suspected, arrange for an eye

examination immediately.

General

This procedure describes a general method for the ClearCurve Drop Cable Pulling Grip Kit

(TKT-CCPG) and its use with both ClearCurve Rugged Drop cable assemblies and ClearCurve

Compact Drop cable assemblies. This pulling grip kit is for use only with the ClearCurve Drop

cable assembly and not a regular single fiber cable assembly. ClearCurve Drop cable construction

is different than regular jumper cable construction and allows for the use of this pulling grip kit.

As with any fiber optic cable installation, proper planning is of paramount importance. Fiber optic

cable installers must always follow the four basic cable placement considerations. First, ensure

there is sufficient slack in the system. Second, monitor the tension and be sure when using the

pulling grip kit to install ClearCurve assemblies to not exceed 50 lbs of tension. Third, do not

exceed the bend radius and refer to the specification sheet or contact Corning Cable Systems for

the minimum bend radius. Last, protect exposed cable using the proper housing and strain relief

for the cable.

STANDARD RECOMMENDED PROCEDURE 004-120 | ISSUE 1 | FEBRUARY 2009 | PAGE 1 OF 4

ClearCurve™ Drop Cable

Pulling Grip Kit

cat. number 004-120, Issue 1

Reason for Change

Initial release