CORNING ONE GX Scheda di installazione rapida - Pagina 9
Sfoglia online o scarica il pdf Scheda di installazione rapida per Strumenti di misura CORNING ONE GX. CORNING ONE GX 14. Higher power 40 w dual-band wcs/2.5 ghz tdd das remote
Anche per CORNING ONE GX: Manuale di informazioni generali (12 pagine)
8.
MOUNT THE GX ONTO THE BRACKET
Step 1:
Referring to Figure 8, carefully fit and hang the GX
unit onto the bracket with the connectors facing
down.
Step 2:
Referring to Figure 9, secure the GX unit to the
bracket by inserting the two provided M8 bolts
into the frame of the GX underside panel.
Step 3:
Using a spanner or wrench, tighten the two M8
nuts.
Note:
Using a threadlocker is recommended to tightly
seal the nuts.
Step 4:
Verify that unit is mounted securely to the bracket.
9.
(OPTIONAL) MOUNT EXTERNAL MULTIPLEXER
Notes:
• Refer to GX external multiplexer quick installation
sheet (CMA-372-AEN) for detailed installation
procedure instructions.
• The GX multiplexer should be mounted adjacent
to the GX RF interfaces (DIN to DIN cables = 1.2 m).
For wall-mount installations:
Step 1:
Using applicable combiner bracket mounting holes
(see A and B in Figure 10) as a guide, mark and drill
four holes for M6 bolts (provided with multiplexer).
Step 2:
Mount combiner on wall using the provided M6
bolts and spring and flat washers (four of each).
For pole-mount installations:
Slip a hose clamp through each end of the factory-assembled
mounting bracket (see indicated arrows in Figure 10) and secure
to pole by tightening clamp.
Corning Optical Communications
Figure 8. Hanging GX on Bracket
Figure 9. Tightening M8 Nuts – Underside
Figure 10. External Combiner Mounting Options
and Grounding Lug
Quick Installation Sheet | CMA-581-AEN | Page 9