Avante U-3000 Manuale d'uso - Pagina 11

Sfoglia online o scarica il pdf Manuale d'uso per Lettore di schede Avante U-3000. Avante U-3000 13.

SAVE TIME

The Save Time menu item allows for recording the time when a record is saved to the flash memory. This allows

repetitive records to be saved when the same card is detected.

To set the Save Time, do the following:

1. Press the OK key when the Save Time option is highlighted. The time format is as follows:

2. Use the

Left arrow key (*) or

Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next

character. Press on the OK key to save the changes.

The Set Frequency menu item allows for choosing the reader's frequency.



Choose "Manual" to manually set the scanning frequency.

Choose "Automatic" to define a range of frequencies and the ratio of correctness. Then, press the OK key



to let the system scan for applicable frequencies. When a desired frequency is detected, press the OK key

to set the scanning frequency.

To manually set the frequency, do the following:

1. Press the OK key when the Manual option is highlighted. The frequency is displayed as follows:

(Where the characters can be numbers and the unit is understood as MHz)

2. Use the

Left arrow key (*) or

Then, use the keypad to enter a number; once a character is changed, the cursor moves to the next

character. Press on the OK key to save the changes; a "Write successful" message will appear at the

bottom of the display.

To set a range of frequencies for the unit to use, do the following:

1. Press the OK key when the Automatic option is highlighted. The frequency range is displayed as follows:

(Where the characters can be numbers and the unit is in seconds)

Right arrow key (#) to move to the character you wish to change.

Main

Right arrow key (#) to move to the character you wish to change.

From

Ratio

U-3000 Reader

XX sec

Frequency

XXX.X

Frequency

XXX.X M

XXX %

2011

11 |

P a g e