ALIBI ALI-DVR3008H Manuale di configurazione rapida - Pagina 5

Sfoglia online o scarica il pdf Manuale di configurazione rapida per DVR ALIBI ALI-DVR3008H. ALIBI ALI-DVR3008H 6. 960h

In the camera setup wizard, you can initially select the recording mode for each camera attached to the camera input BNC connectors.

To use this menu:

In the Camera menu shown above, open graphical menu select the camera to configure. "1" (Analog 1) identifies the camera

plugged into the camera input BNC connector 1, "2" (Analog 2) identifies the camera on BNC connector 2, etc.

To configure the camera for recording, click the Start Recording box to check it, then click the bullet for either Normal

(continuous) mode recording or Motion Detection mode recording.

Do one of the following:

To copy these recording settings to other cameras connected to the DVR, click Copy, then select the other cameras to you

want to apply the settings to.

To configure another camera differently, open the Camera graphical menu and select the next camera to configure. Then

repeat the steps above to configure the recording mode for that camera. You can also Copy these settings to other cameras.

After configuring the recording mode for each camera, click OK to confirm your settings and close the Wizard.

www.Observint.com

Click here to open

the camera

graphical menu

10.

Click OK when the recording mode for each camera is selected. The Wizard will close and the DVR will present the Live View display.

For more information about the Live View display, refer to the user manual.

Step 4. Using the Menu system

After the initial setup of your DVR using the Wizard, the Menus interface enables you to refine your configuration settings and expand the

functionality of the system. To use most menus, the user must log into the DVR system, either locally or remotely, with administrative

privileges.

To open the Menu system from the Live View screen, right click anywhere in the screen, then select Menu

4-channel Live View display