Avantgarde UNO SD Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Avantgarde UNO SD. Avantgarde UNO SD 19.

Stampa la pagina
Avantgarde UNO SD Manuale d'uso
SPEAKER TYPE
UNO G3
DUO G3
PUSH
MODEL NO.
ITRON AMP
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
CONNECTION – ITRON VERSION
+ 1.5
+ 1.5
+ 1.5
0dB
ENGAGED
FUSE
BALANCED XLR CONNECTION
– 1.5
– 1.5
– 1.5
RESET
MID
HIGH
IN
OUT
E FUSE
DRIVER GAIN
BALANCED INPUT
1
SPEAKER TYPE
UNO G3
DUO G3
MODEL NO.
ITRON AMP
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
+ 1.5
+ 1.5
0dB
ENGAGED
FUSE
– 1.5
– 1.5
RESET
MID
HIGH
E FUSE
DRIVER GAIN
Line level connections feature balanced XLR connectors/terminals.
PUSH
The pin assignment of these follows the EIA RS-297-A standard:
2
1
PIN 1 = GND, PIN 2 = HOT, PIN 3 = COLD. Never use cables with
3
differing pin assignment! This will deteriorate the sound quality and
can damage the amplifiers and/or the active power modules of the
subwoofers.
1
Connect the line level output of your preamplifier with the balanced
line level input
�
of the ITRON amplifier with an XLR cable.
4
2
Connect the balanced XLR daisy-chain output of the iTRON ampli‐
fier � and the balanced XLR input of the DSP subwoofer amplifier
with the XLR jumper cable. The jumper cable is included in the ac‐
FUSE
cessory box.
Only now, connect the AC power
3
household AC outlet and turn on the ITRON module � and the
subwoofer DSP amplifier.
SPEAKER TYPE
UNO SD
DUO SD
MODEL NO.
BASSAMP-G3-500
VOL
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
CLIP
SIG
DSP
VOL
DSP PROGRAMMING
SERVICE USE ONLY
SPEAKER LEVEL INPUT
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 570W
POWER OUTPUT – 530W RMS
FUSE 2.5 A SLOW
+ 3
+ 6
0dB
0dB
– 3
– 6
TOTAL GAIN
2
WARNING
ELECTRICAL SHOCK HAZARD
PUSH
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 570W
POWER OUTPUT – 530W RMS
FUSE 2.5 A SLOW
+ 1.5
+ 3
0dB
0dB
– 1.5
– 3
IN
OUT
BALANCED INPUT
TOTAL GAIN
�
of the components to a
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 550W
POWER OUTPUT – 500W RMS
FUSE 4.0 A SLOW
SERVICE USE ONLY
OPERATION – POWER SWITCH
ON/OFF
The power switch � has an "O" OFF position and a "1" ON position.
1
Switch it to the ON position for operation.
2
The speaker has an illuminated push button � on the front below
the tweeter to turn on the speaker.
+ 6
– 6
ORANGE
WHITE
PURPLE
6
3
The brightness of the light can be switched between 8 x intensities
using the DIMMER TOGGLE button � of the DSP subwoofer ampli‐
fier.
TOGGLE
DIMMER
4
The POWER-ON mode switch � of the DSP subwoofer amplifier can
be used to select 4 different power on/off modes. See description of
B C
the subwoofer DSP amplifier.
A
D
POWER ON
MODE
7
18
19
5
= Standby
= ON
= OTA-Firmware Update
(future upgrade)