HIKVISION DS-7332HGHI-SH Manuale di avvio rapido - Pagina 3
Sfoglia online o scarica il pdf Manuale di avvio rapido per DVR HIKVISION DS-7332HGHI-SH. HIKVISION DS-7332HGHI-SH 17.
Stampa la pagina
F R O N T P A N E L ( c o n t i n u e d )
1
Status Indicators
2
On/Off Switch
3
USB Port
4
Drive Bay
5
Direction Buttons
6
Enter Key
7
Numeric/Controls
8
Jog Shuttle
R E A R P A N E L S
No.
Item
1
AUDIO IN
2
Line In
3
AUDIO OUT
5
RS-232
6
eSATA
7
VIDEO IN
8
USB Ports
9
HDMI
10
VGA
11
LAN
12
I/O
13
GND
14
Power
15
Power Switch
Power Indicator: Green when power switch on real panel is on, red when
power switch is off
Ready Indicator: Green when DVR is functioning properly
Status Indicator: N/A
Alarm Indicator: Red when a sensor alarm is detected
HDD Indicator: Blinks red when data is being read from or written to HDD
TX/RX Indictor: Blinks green when network connection is functioning properly
Starts up or shuts down the DVR processes
Connects USB mouse or USB flash memory devices
Location for DVD-RW drive
Navigation keys
Confirms selection
Switches channel in Preview or PTZ Control mode, Inputs numbers in Edit
mode, switches channels in Playback mode
Moves menu selection. In Playback, outer ring speeds up/slows down video.
Inner ring jumps 30 seconds forward/backward in a video. In Preview mode,
cycles through channels.
Description
RCA connector
RCA connector
RCA connector
Connector for RS-232 devices
Connects external SATA HDD, CD/DVD-RW
BNC interface for TVI and analog video input
USB ports for additional devices
HDMI video output connector
DB-15 connector for VGA output. Display local video output and menu.
Connector for network
RS-485
Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins of
PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first
DVR's D+, D- pin should be connected with the D+, D- pin of the next DVR.
Keyboard Keyboard connector
Alarm In
Connector for alarm input
Alarm Out Connector for alarm output
Ground
100 to 240 VAC power
Switch for applying power to the device (do not power
the device's processes by using the On/Off Switch on the front panel)
off
shut down
device until you first