Makita AN942 Manuale di istruzioni - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Makita AN942. Makita AN942 17. Pneumatic construction nailer
Anche per Makita AN942: Manuale di istruzioni (20 pagine), Ripartizione delle parti (3 pagine), Informazioni tecniche (7 pagine)

Stampa la pagina

1. Adjuster

ASSEMBLY

1. Pusher

1. Pusher lever

2. Depress

3. Return

•

To adjust the depth of nailing, turn the adjuster so that the arrow above

004299

the adjuster will point to the number indicated on the adjuster. The depth

of nailing is the deepest when the arrow points to the number 1. It will

become shallower as the arrow points to higher number. The depth can

be changed in approx. 1.0 mm increments per graduation. If nails cannot

be driven deep enough even when the arrow points to the number 1,

increase the air pressure. If nails are driven too deep even when the

arrow points to the number 9, decrease the air pressure. Generally

speaking, the tool service life will be longer when the tool is used with

lower air pressure and the adjuster set to a lower number.

Loading nailer

CAUTION:

•

Always lock the trigger and disconnect the hose before loading the

nailer.

•

Select nails suitable for your work. Insert strip of nails into the magazine.

004300

•

Pull the pusher lever to the rear to engage the pusher to the last nail

004301

Unloading nailer

CAUTION:

•

Always disconnect the air hose before unloading the nailer.

•

Pull the pusher lever to the rear. Return the pusher lever back while

004302

keeping the pusher depressed to disengage it from the strip of nails.