ALIBI ALI-QVR3104H Manuale di configurazione rapida - Pagina 3
Sfoglia online o scarica il pdf Manuale di configurazione rapida per DVR ALIBI ALI-QVR3104H. ALIBI ALI-QVR3104H 4. Ali-qvr3100h series
Stampa la pagina
By default, the Setup Wizard will open automatically. Refer to the Alibi Embedded Video Recorder Firmware V3.4.x User Manual for
complete instructions for using the Wizard and configuring and using your DVR.
Important Notes for using the Wizard:
When configuring the recorder, consider the following:
Password: When logging into the recorder for the first time, create a "Strong" administrator user password. Follow the on-screen
•
instructions, and save this password and the GUID file created by the firmware in a secure location. NOTE: There is no factory default
password for this device.
Date and Time: Set the time zone, date and time correctly. All recorded video and capture (photo) files are time stamped.
•
Storage - HDD: In the HDD Management wizard, if a new recorder is shipped with a pre-configured HDD, nothing needs to be done
•
with it in this window. If you installed an HDD or replaced the HDD, that HDD needs to be initialized by the recorder before it can be used
to record data. Select (check the box for) that HDD, then click Init to initialize the disk. NOTE: Init will erase all data from the disk and
can take several minutes to complete. When the initialization is complete, click Next to continue.
Network Settings: By default, the recorder acquires it's network settings using DHCP (dynamic host configuration protocol).
•
Depending on the configuration of the network, these settings may change. To improve remote access to the recorder, Observint
recommends that you configure the DVR with fixed network settings. To easily change the DHCP acquired network settings to fixed
network settings,
un-check the Enable DHCP option in the network setup menu, and then click Apply.
Platform Access: If the device has access to the Ethernet, enable Guarding Vision P2P cloud service. This feature allows easy
•
firmware version checking and upgrade, and easy setup with the Alibi Witness 2.0 smartphone app for remote monitoring.
Step 7. Access the Menu system
After the initial setup of your QVR using the Wizard, the Menus interface enables you to refine your configuration settings and expand the
functionality of the system. To use most menus, the user must log into the firmware system, either locally or remotely, with administrative
privileges. To open the Menu system from the Live View screen, right click anywhere in the screen, then click Menu.
3
www.Observint.com
If ID Authentication is not disabled (see the Menu | Configuration | General settings), a login window will open. In the Login window,
select a User Name with administrative privileges, enter its password, then click OK. A window of Menu icons will open.
For additional information about using your system, refer to the ALIBI Embedded Network Video Recorder Firmware V3.4.x User
Manual.
Specifications
Model
ALI-QVR3104H
Video compression
H.265+ / H.265 / H.264 OVC / H.264
4-ch
Video input
BNC interface (1.0 Vp-p, 75 Ω), supporting coaxitron connection
3 MP (channel 1 only), 1080p30,
Supported HD-TVI input
720p60, 720p30
AHD input
1080p30, 720p30
HD-CVI input
1080p30, 720p30
Up to 4 MP resolution, supports H.265+
IP video input
/ H.265 / H.264+ / H.264 IP cameras
Audio compression
G.711u
Audio input
1-ch, RCA (2.0 Vp-p, 1 KΩ)
CVBS output
Support
HDMI / VGA output
1-ch, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz, 1024 × 768/60 Hz
When 1080p Lite mode not enabled: 3 MP / 1080p/720p / VGA / WD1 / 4CIF /CIF;
Encoding resolution
When 1080p Lite mode enabled: 3 MP / 1080p lite / 720p lite / VGA / WD1 / 4CIF / CIF
Main stream when 1080p Lite mode not enabled: for 3 MP stream access: 3 MP / 1080p / 720p / VGA / WD1 / 4CIF / CIF @ 15 fps
For 1080p stream access: 1080p/720p @ 15 fps; VGA / WD1 / 4CIF / CIF @ 30 fps
Frame rate
For 720p stream access: 720p / VGA / WD1 / 4CIF / CIF @ 30 fps
When 1080p Lite mode enabled: 3 MP @ 15 fps, 1080p lite / 720p lite / VGA / WD1 / 4CIF / CIF@ 30 fps
Video bit rate
32 Kbps to 6 Mbps
Audio output
1-ch, RCA (linear, 1 KΩ)
ALI-QVR3108H
ALI-QVR3116H
8-ch
16-ch
3 MP (channels 1, 2 only), 1080p30,
3 MP (channels 1, 2, 3, 4 only), 1080p30,
720p60, 720p30
720p60, 720p30
2 channels, up to 4 MP resolution, supports H.265+ / H.265 / H.264+ / H.264 IP
cameras
1 channel, BNC (1.0 Vp-p, 75 Ω), resolution: 704 × 480
VGA: 1-ch, 1920 × 1080/60Hz,
1280 × 1024/60Hz, 1280 × 720/60Hz,
1024 × 768/60Hz
HDMI: 1-ch, 4K (3840 × 2160)/30Hz, 2K
(2560 × 1440)/60Hz,
1920 × 1080/60Hz, 1280 × 1024/60Hz,
1280 × 720/60Hz, 1024 × 768/60Hz
© 2017 Observint Technologies. All rights reserved.