Makita BFH040F Informazioni tecniche - Pagina 15

Sfoglia online o scarica il pdf Informazioni tecniche per Utensile elettrico Makita BFH040F. Makita BFH040F 18. Makstar 12v cordless screwdrivers

(4) Wiring near the buzzer circuit and interlock switch

Place the lead wires from Buzzer between the boss and the wall of Housing R as illustrated in Fig. D.

And then fix Interlock switch unit to Housing R by fitting the through holes of the Switch unit to the bosses

on Housing R as illustrated in Fig. E.

Fig. D

Buzzer

Fig. E

Bosses on Housing R

(5) Wiring near the terminal

1. Connect Terminal to Motor control unit as follows.

There is a flag receptacle on each of the two lead wires (black one and red one) from Motor

control unit.

Connect these receptacles with Terminal as illustrated in Fig. F.

Be sure to connect the flag receptacle on the red lead wire to the (+) terminal, and connect

the other one on the black lead wire to the (-) terminal.

Fig. F

Flag receptacle on

black lead wire

Terminal

Boss of Housing R for holding Buzzer

Wall of Housing R

Lead wire from Buzzer (white)

Lead wire from Buzzer (red)

Housing R

Interlock switch unit

Boss for protecting Interlock switch unit

Lead wire from Interlock switch unit (red)

Lead wire from Interlock switch unit (yellow)

Flag receptacle

on red lead wire

P 15 / 17